ILS/Tacan are fubar.. |
Post Reply ![]() |
Author | |
WarHorse47 ![]() P/UT ![]() ![]() Joined: 25 Jul 2008 Location: Puget Sound Points: 188 |
![]() ![]() ![]() ![]() ![]() Posted: 06 Sep 2016 at 9:43pm |
I cannot get the ILS or Tacan to work as expected with the new SP1.
I continually fly to the same airports to conduct navigation and landing exercises. One of my primary destinations is Boeing Field (KBFI) in Seattle, WA. Using Fair Weather the landings are always on 13R which is 110.90 on Nav1 or 46X for the Tacan. Since doing a complete reinstall this morning with SP!, I've made two flights to KBFI. Neither the ILS nor the Tacan can locate the runway. The distance to the ILS is way off, and there is no glideslope. The localizer is reading something, but not the runway. Either I am doing something wrong, or there is a major issue with the HSI, ILS and Tacan. I'm at a loss on what to do next. The flight dynamics are greatly improved with the SP1, but its near impossible to fly any distance on course to an ILS runway (without using the GPS). Can somebody test this feature and let me know if there is something I'm overlooking? BTW, all my flights are "cold and dark" and use the hidden quick start. Thanks --WH |
|
![]() |
|
WarHorse47 ![]() P/UT ![]() ![]() Joined: 25 Jul 2008 Location: Puget Sound Points: 188 |
![]() ![]() ![]() ![]() ![]() |
Okay. This morning I repeated my flight to KBFI and got a good ILS reading, but not with the Tacan.
Despite setting the ILS and the Tacan to the same identical frequency, the Tacan did not pick up the runway. In fact the green direction arrow never provided a direction, and the distance was off by 23 miles from the ILS. So, why is there a difference between the Tacan and ILS? And why do these navigation aids function randomly when all my failures are disabled? --WH |
|
![]() |
|
WarHorse47 ![]() P/UT ![]() ![]() Joined: 25 Jul 2008 Location: Puget Sound Points: 188 |
![]() ![]() ![]() ![]() ![]() |
Seems this problem will not go away.
Three days ago I set another flight to KBFI and had no problem capturing the Tacan or ILS. Just now I finished a similar flight, only this time neither worked. I decided to follow the Tacan and see where it took me and ended up over KPAE (Snohomish County, Paine Field) which is over 30 miles north of KBFI. Then I switched to the ILS to see where it took me and ended up somewhere over Puget Sound. The only difference between these flights were that the first one was with a clean aircraft and the second one had external stores (display pod). --WH |
|
![]() |
|
WarHorse47 ![]() P/UT ![]() ![]() Joined: 25 Jul 2008 Location: Puget Sound Points: 188 |
![]() ![]() ![]() ![]() ![]() |
Well, nuts....
![]() I've tried various startup combinations to see if there is anything I'm missing. Quick Start w/stores. Quick Start clean. Interactive menu start clean. Results all the same. The Tacan takes me way off course, 40 miles north of where its supposed to take me. And as for the ILS,I didn't find any runway in the middle of Puget Sound. Haven't heard anything from anybody, so I guess nobody is flying the Hawk and making ILS approaches these days and Tech Support is busy doing something else. Guess this is going in the hangar. Very disappointed. --WH |
|
![]() |
|
Delta558 ![]() First Officer ![]() Just Flight FDE Developer Joined: 10 Jun 2012 Points: 383 |
![]() ![]() ![]() ![]() ![]() |
Have you put in a support ticket? No official support is provided in the forum - tech support are probably busy dealing with support tickets
![]() Paul. |
|
![]() |
|
WarHorse47 ![]() P/UT ![]() ![]() Joined: 25 Jul 2008 Location: Puget Sound Points: 188 |
![]() ![]() ![]() ![]() ![]() |
Yes, I have - both direct e-mail and support ticket. At the moment Martyn is waiting for the developer to return to look at this issue.
As you can see from my first post, I posted this issue on the forum on 9/6. However, this issue was discussed elsewhere and existed before the SP1 was released. http://forum.justflight.com/forum_posts.asp?TID=30869&KW=&title=hawk-tacan-ils My posts on the forum are to determine if anyone else has the same problems and possible solution. --WH |
|
![]() |
|
Delta558 ![]() First Officer ![]() Just Flight FDE Developer Joined: 10 Jun 2012 Points: 383 |
![]() ![]() ![]() ![]() ![]() |
I've just tried it out at MSPG's RAF Valley scenery and it worked perfectly in ILS mode. I've not used the ILS during testing (had enough on my plate in other areas!) and have not researched it before testing - simply worked my way around the cockpit and ensured that everything which could possibly affect it was set correctly!
ILS radio rear right panel set to ILS on the rotary and tuned correctly. centre panel in front of stick set to SLV, push to sync and erect poth pushed. lower of same panel centre set to 'G' course set on ILS instrument ILS / Tacan directly to the right of that set so that ILS is lit. Other than that, I used the electrical master switch and the clickspot on the bottom of the shift2 menu to start (for simplicity of testing) and I did turn the TACAN radio on (TX/RX) but that was just a general thing and not expected to influence the result of the ILS test. As far as I can see, the ILS works perfectly well and is very accurate. Have you tested it at multiple airfields? (I freely admit I haven't, just at the add-on Valley but if it works there I presume it will work elsewhere?) Other than that, I don't know what to suggest. Hope this gets sorted for you, Paul. |
|
![]() |
|
Delta558 ![]() First Officer ![]() Just Flight FDE Developer Joined: 10 Jun 2012 Points: 383 |
![]() ![]() ![]() ![]() ![]() |
Just tested ILS at the stock FSX Warton and it worked perfectly there as well.
|
|
![]() |
|
WarHorse47 ![]() P/UT ![]() ![]() Joined: 25 Jul 2008 Location: Puget Sound Points: 188 |
![]() ![]() ![]() ![]() ![]() |
Yep, done all that.
Only new items were as you mentioned, "push to sync and erect poth pushed. lower of same panel centre set to 'G'". So, I did another test flight and still could not get either Tacan or ILS. As I mentioned early in this thread, this problem is random. I have been able to get both Tacan and ILS on previous flights. Sometimes just ILS. This morning I played around with some of the radio commands. Although the ILS doesn't use the standby frequency, I was able to get it to change. After resetting it the ILS functioned. From what the manual said, the ILS us based on Nav1 and the Tacan is based on Nav2. Still unreliable on my setup. Only other thing I discovered was that there is a dual [Radios] section in the aircraft.cfg. Still, deletion of the 2nd duplicate section did not resolve my problem. I've also been flying Manfred Jahns C-47 V.3 and the new Carenado DO228, and have no problems with ILS or Tacan. I loaded and started the Cessna 172 then switched aircraft over to the Hawk, and still the problem persists. I'm definitely baffled as to what's going on. --WH |
|
![]() |
|
Delta558 ![]() First Officer ![]() Just Flight FDE Developer Joined: 10 Jun 2012 Points: 383 |
![]() ![]() ![]() ![]() ![]() |
Understandably baffled, by the looks of it! I'm sure Rich will have a look at this and hopefully work out what is going on. FUBAR may be a touch extreme - inconsistent seems a better description, so I'll keep trying while I'm working further on the fde and aim for ILS landings as frequently as possible to see if I can reproduce your problems at all.
Paul. |
|
![]() |
|
WarHorse47 ![]() P/UT ![]() ![]() Joined: 25 Jul 2008 Location: Puget Sound Points: 188 |
![]() ![]() ![]() ![]() ![]() |
The definition of FUBAR I'm using is "Fouled Up Beyond All Recognition."
After many, many flights with different parameters, I happened to come across something that if done consistently will give me accurate readings for the ILS and Tacan. I'll pass this on to Rich so he can look closer at the gauges as this may provide some clue as to why my setup is causing me problems. It may also explain why I've been getting inconsistent results. --WH |
|
![]() |
|
WarHorse47 ![]() P/UT ![]() ![]() Joined: 25 Jul 2008 Location: Puget Sound Points: 188 |
![]() ![]() ![]() ![]() ![]() |
Well, believe it or not I'm still waiting for a response from Tech Support on this issue.
I did come up with a solution to get a good ILS/Tacan. Setting my ILS and Tacan frequencies before takeoff doesn't work. If I reset them in flight, they work. For example, if I want an ILS of 110.90 I have to rotate the far right wheel from 0 to 5 and back to 0 to get a read. So my question to Tech Support is why I have to take this extra step? Baffling for sure. --WH |
|
![]() |
|
Rich ![]() Just Flight Staff ![]() ![]() Joined: 31 Mar 2008 Location: Planet Earth Points: 8543 |
![]() ![]() ![]() ![]() ![]() |
Hi,
It's not our tech support team, your request has been passed to me. Right now I have some other tasks to complete, but I'll shortly be coming back to the Hawk to sort some remaining issues out (P3D HUD for example). I've got your email put aside as well and I'll be taking a look at what you reported asap and either contacting you directly for more info, or just fixing it based on the info I already have and rolling it into the next service pack. Thanks Rich
|
|
![]() |
|
WarHorse47 ![]() P/UT ![]() ![]() Joined: 25 Jul 2008 Location: Puget Sound Points: 188 |
![]() ![]() ![]() ![]() ![]() |
Thank you, Rich.
While I wait for the Meteor to be released, I'll be checking in frequently for any update. Fortunately, the wife has kept me busy with "Honey-Dos" and I haven't had much flight time. ![]() --WH |
|
![]() |
|
GabethePilot ![]() First Officer ![]() ![]() Joined: 12 Apr 2008 Points: 267 |
![]() ![]() ![]() ![]() ![]() |
Hi all.
Has this TACAN business been sorted yet ? Is there a guide to how it works ? Also, has anyone gotten around to creating a bgl file for all the TACANS in the UK ? I remember about 5 years ago or so, it was in the works when the previous Hawk was released. Thnx for any help. |
|
![]() |
|
![]() |
|
Allenby ![]() Check-In Staff ![]() ![]() Joined: 07 Apr 2008 Location: Shropshire UK Points: 49 |
![]() ![]() ![]() ![]() ![]() |
The Tacan bgl file I use is one I down-loaded from Avsim back in FS2004 days and am still using it in P3D v3.4, works well.
Navaids covered are:- NAVAIDS: ======== 111.10 CGY Coningsby 112.30 CTM Cottesmore 117.10 WAD Waddington 117.40 CWZ Cranwell 117.60 WIT Wittering 109.80 LYE Lyneham 111.90 BZN Brize Norton 113.40 FFA Fairford 109.60 ODH Odiham 116.50 CSL Coltishall 108.70 MAM Marham 115.90 MLD Mildenhall 110.20 LKH Lakenheath 109.30 WTM Wattisham 114.10 WAL Wallasey 113.20 WTN Warton 112.60 LEE Leeming 113.70 TOP Topcliffe 109.00 LOO Linton-On-Ouse 108.40 VYL Valley 114.80 SAT St Athan 111.00 VLN Yeovilton 109.80 KSS Kinloss 110.50 LUK Leuchars CHARTS: ======= Charts of the TACAN approach can be found and downloaded at (look under procedures): http://www.cenor.org/ Working UK TACAN Beacons for FS2004 by Marcel Ritzema "In real-life TACAN beacons require a TACAN receiver to receive the course (OBS) information of the beacon. With a civil VOR/DME receiver you only receive the distance (DME) to the beacon. The problem in FS is that there are no dedicated TACAN gauges, so it's not possible to perform TACAN approaches, because this requires course information of the beacon. To overcome this problem i've modified the TACAN beacons in the UK so you can fully use them with civil receivers. And so are able to fly TACAN approaches." Have not checked if its still available in Avsim and I could use a guide on the operation of the ILS/Tacan system in the Hawk. |
|
Expect the unexpected.Intel i5-2500K@3.30GHz Sandy Bridge
ASROCK Q77M vPRO Motherboard 8GB DDR3 Ram,ASUS NVIDIA GeForce GTX 1060 3GB, OCZ 750 watt PSU, Windows 10 Home 64bit |
|
![]() |
|
Herky ![]() P1 ![]() ![]() Joined: 05 Jul 2009 Location: Great Britain Points: 792 |
![]() ![]() ![]() ![]() ![]() |
Does the Tacan work in the Hawk?
If not, then how do you navigate around the map? I need to know this before buying? Now the Tac Pack is available in P3dv4, I have this aircraft in my list, but useless if you can not navigate! Regards David |
|
You Tube at HERKY231 or David Herky
|
|
![]() |
|
GabethePilot ![]() First Officer ![]() ![]() Joined: 12 Apr 2008 Points: 267 |
![]() ![]() ![]() ![]() ![]() |
I believe the Tacan does work in the Hawk.
You need to hunt down the scenery file referred to above. Then suss out how to use the Tacan... presumably works like an ADG.... direction and distance. |
|
![]() |
|
![]() |
|
Herky ![]() P1 ![]() ![]() Joined: 05 Jul 2009 Location: Great Britain Points: 792 |
![]() ![]() ![]() ![]() ![]() |
Thanks. I hope there is no need to add scenery files? I just picked up the VRS Superbug/Tacpack bundle and I am still picking up my jaw from the floor! The Tacan radios in the F/A 18 just tune to the Tacan, which is co located with most VOR beacons, as seen on Sky Vector for example. If the Hawks Tacan works then with it's Tacpack compatibility, it would be a nice addition to have. Cheers. |
|
You Tube at HERKY231 or David Herky
|
|
![]() |
|
GabethePilot ![]() First Officer ![]() ![]() Joined: 12 Apr 2008 Points: 267 |
![]() ![]() ![]() ![]() ![]() |
Going to ask over at ADE Scruffyducks..... they will know how to get Toucans squawking !
All above puns intended... ![]() Now I can actually get 120 fps in the Hawk VC in P3D, I may break out the old and dusty TrackIR.... I feel a DME arc coming on. |
|
![]() |
|
![]() |
Post Reply ![]() |
|
Tweet
|
Forum Jump | Forum Permissions ![]() You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |