Duchess Glitches |
Post Reply |
Author | |
PMJ
Check-In Staff Joined: 23 Dec 2018 Location: US Points: 8 |
Post Options
Thanks(0)
Posted: 21 Jan 2019 at 3:08am |
Duchess Glitches: 1. All circuit breakers (push-pull type) in the Duchess are pulled out, meaning no circuits will work, but they all do? If I push each and every breaker in, as they should be under normal circumstances, the circuits will work—but they do not. Have they been programed backwards like the aux pumps—off is on and on is off? (This aux pumps glitch has been corrected.) I did not notice the breakers glitch on release. All circuit breakers in the Duchess are configured incorrectly. If you look closely they are all pulled out. 2. While in flight, if you place the throttle on one engine to idle and leave the other engine at cruise rpm, the Duchess pulls to the wrong direction. For example: If I retard the left throttle the plane will turn to the right, it should be to the left; if I retard the right throttle, the plane will turn to the left, it should be to the right. What actually happens is the Duchess will either continue to fly straight or bank slightly to the engine set at cruise—both of these conditions are incorrect. 3. You have a nervous landing gear horn that comes on while on the ground, or after touchdown while rolling to a stop. This should not be the case. The squat switch should prevent this from happening. This is very annoying. Either I advance the mixture or shut the Battery switch off to turn the horn off. Sometimes moving the landing gear handle up down will shut the horn off but not always. 4. When I place the throttles to idle-cut off the engines continue to run for about 12 to 15 seconds—it should be almost immediately. Kindly ask your staff to look into these items. Other than that your rendition of the Duchess is pretty good. P.S. I've downloaded all five updates (v1.01 through v1.05). Thanks, Pat |
|
Martyn
Just Flight Staff Development Manager Joined: 31 Mar 2008 Location: Huntingdon, UK Points: 7615 |
Post Options
Thanks(0)
|
Hi Pat,
Thanks for the feedback. I'll get our support team to test and log these so the developers can address them in the next update. Thanks Martyn
|
|
Martyn
Just Flight Ltd |
|
Craig.Haskell
Just Flight Staff Technical Support Joined: 08 Jun 2017 Location: Bournemouth Points: 22 |
Post Options
Thanks(0)
|
Hi Pat,
Please can you confirm which sim you are using? Thanks Craig
|
|
PMJ
Check-In Staff Joined: 23 Dec 2018 Location: US Points: 8 |
Post Options
Thanks(0)
|
Craig, I'm using P3D v4.4 operating platform Win 10 Pro with all Saitek equipment: panels, flight instruments and flight controls Three 27" monitors Thanks, Pat
|
|
Post Reply | |
Tweet
|
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |