Tornado GR1 framerate issue |
Post Reply | Page 123 12> |
Author | |
Gixxuki
Check-In Staff Joined: 25 Jun 2015 Points: 3 |
Post Options
Thanks(0)
Posted: 25 Jun 2015 at 3:58pm |
Hey guys,
i've got a massive framerate issue when i load the GR1. I can fly the PMDG with a constant framerate of about 30fps. But when i load the Tornado with the same settings the fps drop down to 5-max 10. Is anybody else having this problem? I think this can't be normal because the canberra is running so smooth. I was really excited about the release but at the moment it's unplayable for me. Greetings
|
|
Martyn
Just Flight Staff Development Manager Joined: 31 Mar 2008 Location: Huntingdon, UK Points: 7615 |
Answer Post Options Thanks(0) |
You can now download Tornado SP 4.1 - http://www.justflight.com/support/tornado-gr1/d4bc508
During testing we saw anywhere from a 25-45% increase in FPS with SP 4.1 installed (compared to SP3) depending on factors such as PC configuration and the number/complexity of other add-ons installed (scenery, AI traffic etc).
The support page lists the fixes/features included in the service pack. As usual, we will continue to address any issues that are reported and will look to further improve performance where possible.
|
|
gjharrall
Check-In Staff Joined: 25 Jun 2015 Points: 4 |
Post Options
Thanks(0)
|
Same issue here. Max 16 FPS in VC.
Complete stutter fest and not at all happy with the pre-purchase. Should have known better. |
|
gjharrall
Check-In Staff Joined: 25 Jun 2015 Points: 4 |
Post Options
Thanks(0)
|
Will add that my PC is 4.6 ghz 2600k with a GTX 770 and 8GB of RAM.
|
|
Hulmelad
Check-In Staff Joined: 25 Jun 2015 Location: Manchester Points: 7 |
Post Options
Thanks(0)
|
I am afraid you can count me in on this as well, I am getting FRPS at 4 to 8 in the VC front and back, if I go outside I get about 10 to 12 frames...
Strangely if I stay outside and re-load the aircraft I then get 28 to 35 frames but as soon as i enter the VC they drop back to 4 to 8, after the VC the outside frames drop back to 10 to 12. Unfortunately this has rendered what looks a fantastic model unusable |
|
Steve M
Check-In Staff Joined: 25 Jun 2015 Points: 3 |
Post Options
Thanks(0)
|
Me too,
I've waited a long time for this one and bitterly disappointed. Intel i7 3770k running at 4.5 ghz, GTX970 4gb graphics and 8 gig of RAM. Lovely model but the same low frame rate issue as above. Steve M
|
|
RemcovanR
Check-In Staff Joined: 29 Apr 2015 Location: Netherlands Points: 23 |
Post Options
Thanks(0)
|
So, count me in as well... In my case FSX crashes even before it has fully made the startup of the GR1. It comes up to 86% and then... CRASH. "My computer has ran out of memory".
For a fact I've recently reinstalled my pc, so this wouldn't happen. This is the fourth time in a row that JF products have failed me. Still, I'm pretty sure the support team will solve these issues. After all, we've invested in this product so JF could make a perfect GR1 |
|
Regards, Remco
|
|
Hulmelad
Check-In Staff Joined: 25 Jun 2015 Location: Manchester Points: 7 |
Post Options
Thanks(0)
|
I have looked at the manual on page 97 and put into place the VC frame rate fix by clicking no back seat and the 1024 textures but I am sad to say that it has made little if any improvement
|
|
miragecy
Check-In Staff Joined: 18 Jun 2015 Points: 10 |
Post Options
Thanks(0)
|
I have a frame rate issue as well... The only aircraft in my hangar in which FPS drop below 30 and I have almost every high quality payware aircraft... Fantastic aircraft though, very realistically and very high quality made... I'm sure the team will solve this issue!
Andy
|
|
RemcovanR
Check-In Staff Joined: 29 Apr 2015 Location: Netherlands Points: 23 |
Post Options
Thanks(0)
|
So, like Hulmelad, changed the framerate by choosing 1024 textures (standard) and kicked the backseat out. Now it does run, but with huge framerate issues. JF, please respond to this discussion
|
|
Regards, Remco
|
|
miragecy
Check-In Staff Joined: 18 Jun 2015 Points: 10 |
Post Options
Thanks(0)
|
Guys, are you able to raise the landing gear? I cannot
Andy
|
|
Hulmelad
Check-In Staff Joined: 25 Jun 2015 Location: Manchester Points: 7 |
Post Options
Thanks(0)
|
I can confirm that the gear works for me 😊 I have been flying it quite well from the outside,not ideal I know but if I stay away from the VC my frames around default scenery is 30+, using F5 through F8 to work the flaps and wing sweep
|
|
gjharrall
Check-In Staff Joined: 25 Jun 2015 Points: 4 |
Post Options
Thanks(0)
|
Removing the back seat cockpit option has done nothing for FPS on my setup. The textures were already set at 1024 on my installation.
This release was clearly not ready for prime time as these FPS issues are so obvious. Its not even close to usable in its current form. Lets be upfront here.....this is not a 'cheap' priced addon and it should not be this plagued with performance issues on its 1st day of release. The savings on the pre-pay suckered me into this purchase along with my love of the Tornado. Heart ruled head clearly on hitting the 'buy' button unfortunately.
|
|
MartinW
Moderator in Command Joined: 31 Mar 2008 Location: United Kingdom Points: 26722 |
Post Options
Thanks(0)
|
http://www.justflight.com/support
Hi chaps, have any of you asked for support. That's the eay to go. |
|
gjharrall
Check-In Staff Joined: 25 Jun 2015 Points: 4 |
Post Options
Thanks(0)
|
Yep, ticket already submitted.
|
|
RemcovanR
Check-In Staff Joined: 29 Apr 2015 Location: Netherlands Points: 23 |
Post Options
Thanks(0)
|
Yes, made a ticket about two hours ago. JF office hours... So response will be tomorrow. But forum helps to understand the issues better
|
|
Regards, Remco
|
|
neilintheus
Check-In Staff Joined: 25 Jun 2015 Location: London Points: 6 |
Post Options
Thanks(0)
|
Same issue here. However when I choose front cockpit only, which to be honest I shouldn't need to do, the rear cockpit still seems to be there.
Re-loaded the Canberra demo file to see if that had issues, and no 25-30 fps without a problem :( Maybe I'll get a refund and buy the Canberra as I should have done months ago.
|
|
Hulmelad
Check-In Staff Joined: 25 Jun 2015 Location: Manchester Points: 7 |
Post Options
Thanks(0)
|
Hi I will indeed be doing, I thought I would try to get to grip with the problem fully so I can make reasonable description of the issues I am having, please do not think any of my previous posts are in anger, I owe Justflight and the developer the courtesy of making sure that nothing is wrong with my FSX/PC set up before going for support, it looks like the problem is with the VC for me at least,even at UK2000/Orbx and Aerosoft airfields I am getting 30+ frames providing I go outside the aircraft and then reload |
|
whiskylima
Check-In Staff Joined: 21 Apr 2008 Location: Manchester Points: 41 |
Post Options
Thanks(0)
|
I have just had a quick flight around the Mach loop in the Tornado. I am using Prepar3d v2.5 on an i7 4900k and an nvidia 970gtx with 16 GB of ram. The scenery is Horizon Generation X and while I am getting between 16 - 22 fps, the aircraft is very flyable with only a slight stutter evident. Not as smooth as the Canberra or some other aircraft, but nevertheless I do not think it is as bad as has been suggested.
|
|
neilintheus
Check-In Staff Joined: 25 Jun 2015 Location: London Points: 6 |
Post Options
Thanks(0)
|
I have only have an i5 and lower spec NVidia card to play with. For me it is as bad as is been made out. 9fps in the cockpit is bad.
Please respect what people are saying. We're not lacking in intelligence or else we wouldn't be politely asking for help. Btw I have submitted a ticket.
|
|
Pip B
Check-In Staff Joined: 25 Jun 2015 Points: 22 |
Post Options
Thanks(0)
|
Hi, ticket submitted, frame rate 8.0 to 8.5 does not appear to change much with reducing the scenery detail or removing the back seat option. I fear that while my system runs the Majestic Q400 ,Aerosofts A320 and the Canbera at usable FPS, unless a miracle occurs,my system is not going to get to a usable FPS .
Hoping for a miracle P3D v 2.5 current version Latest Nvidia Drivers |
|
Post Reply | Page 123 12> |
Tweet
|
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |