Print Page | Close Window

First start Just Flight

Printed From: Just Flight Forum
Category: Just Flight Products
Forum Name: Prepar3D
Forum Description: Discussion area for Prepar3D
URL: http://forum.justflight.com/forum_posts.asp?TID=32553
Printed Date: 27 May 2020 at 10:12pm


Topic: First start Just Flight
Posted By: jamo
Subject: First start Just Flight
Date Posted: 29 Nov 2018 at 9:06am
I installed Just Flight Taffic Global last night and I am very satisfied with it, especially the beautiful glossy colors of the aircraft are very nice. Thumbs Up

I notice that all planes are stationary without movement, can you get some movement in them or does it hear that? Question

Regards, jamo



Replies:
Posted By: Rich
Date Posted: 29 Nov 2018 at 10:15am
Hi Jamo,
If you go to Settings and turn down the slider for airport vehicles, that should speed up the time it takes for aircraft to begin moving. 
With the airport vehicles enabled, the aircraft will run through several procedures such as fueling, passenger loading etc and that can take anything up to 20mins before you'll start seeing aircraft move. Turn these off and they should get underway pretty quickly after loading.


-------------
http://www.facebook.com/#!/pages/Just-Flight/15266573498" rel="nofollow">



Posted By: jamo
Date Posted: 29 Nov 2018 at 1:08pm
Thank you, 

It's possible to assign where to find these settings please?

Like to know where to find
If you go to Settings and turn down the slider for airport vehicles

Like to know where to find
With the airport vehicles enabled

and
Turn these off and they should get underway pretty quickly after loading.



Regards,
Jamo


Posted By: Rich
Date Posted: 29 Nov 2018 at 1:20pm
Hi,
The slider in question is the Airport Vehicle density within the P3Dv4 settings screen. 

I hope that helps

-------------
http://www.facebook.com/#!/pages/Just-Flight/15266573498" rel="nofollow">



Posted By: jamo
Date Posted: 29 Nov 2018 at 1:31pm
OK, thank you for replying. Smile



Print Page | Close Window