Laminar ground effect issues
Printed From: Just Flight Forum
Category: Just Flight Products
Forum Name: PA-28R Arrow/Turbo Arrow III/IV and Warrior II
Forum Description: Discussion area for the PA-28 aircraft (PA-28 Arrow III, Turbo Arrow III/IV and Warrior II)
URL: http://forum.justflight.com/forum_posts.asp?TID=32232
Printed Date: 19 Apr 2024 at 5:45pm
Topic: Laminar ground effect issues
Posted By: JazzBassman
Subject: Laminar ground effect issues
Date Posted: 27 Mar 2018 at 9:19pm
|
Evening, Had the PA28 Arrow III in X plane 11 v11.10 for a week or so now and I am very impressed and pleased with the quality. V1.5.1 installed with no snags. Realism is close to the mark, (had about 10 hours tuition in a warrior II a few years back).....very immersive and my go to plane when not using the FF A320 ultimate. One note....there are multiple posts on the x plane.org forum regarding aircraft performance on flare at 60 knots or less...it seems to loose any ground effect resulting in a severe landing every time. Is this a recognised problem? Yours Aye JazzBassman. |
Replies:
Posted By: Martyn
Date Posted: 28 Mar 2018 at 10:47am
|
Dan (danklaue) and Joe (NoJoe) from Thranda are very active on the XP.org forum thread and are explaining the situation in depth - http://forums.x-plane.org/index.php?/forums/topic/139803-warrior-ii-landing-problem/" rel="nofollow - http://forums.x-plane.org/index.php?/forums/topic/139803-warrior-ii-landing-problem/ ------------- Martyn Just Flight Ltd |
Posted By: sidfadc
Date Posted: 21 Apr 2018 at 10:15am
| Trouble is the forum in the link above is dead. I’m also experiencing this sinking effect under 60 knots, kind of makes the plane impossible to land. So is it a laminar bug and if so is there a workaround? |
Posted By: ThomasAH
Date Posted: 21 Apr 2018 at 12:42pm
Must have been a temporary error, or limited to your region. The link works for me right now. |
sidfadc wrote:Posted By: sidfadc
Date Posted: 21 Apr 2018 at 1:26pm
| Sorry I meant the forum is dead not the link |
Posted By: Martyn
Date Posted: 24 Apr 2018 at 8:06am
|
It shouldn't be impossible to land by any means, but this is a current limitation of the simulator that we are waiting for Laminar to address. ------------- Martyn Just Flight Ltd |
Posted By: pilot100
Date Posted: 06 May 2018 at 1:27am
|
personally I think this is a JF issue , I am seeing what is descibed in P3D v4.2. see my post on heavy nose on landing for Arrow. as stated earlier great plane but landing is not so good. Pilot100
|
Posted By: pilot100
Date Posted: 07 May 2018 at 2:28am
| btw just re reading this topic, if you land an Arrow at less than 60 kts you are very close to a stall even with flaps, so a heavy plane like the Arrow would drop out of the sky. |
Posted By: Martyn
Date Posted: 08 May 2018 at 11:46am
Two entirely different teams are responsible for the flight dynamics in FSX/P3D and XP11. This issue is being worked on but is dependant on updates from Laminar. ------------- Martyn Just Flight Ltd |