Print Page | Close Window

GoFlight (GIT) files for XP11 version of PA28R

Printed From: Just Flight Forum
Category: Just Flight Products
Forum Name: PA-28R Arrow/Turbo Arrow III/IV and Warrior II
Forum Description: Discussion area for the PA-28 aircraft (PA-28 Arrow III, Turbo Arrow III/IV and Warrior II)
URL: http://forum.justflight.com/forum_posts.asp?TID=32060
Printed Date: 19 Apr 2024 at 5:54am


Topic: GoFlight (GIT) files for XP11 version of PA28R
Posted By: robains
Subject: GoFlight (GIT) files for XP11 version of PA28R
Date Posted: 22 Jan 2018 at 5:00am
For GoFlight users that are using Steve's GoFlight Interface Tool  https://www.pollypotsoftware.org.uk/" rel="nofollow - https://www.pollypotsoftware.org.uk/

Feel free to do whatever you want with these files. I can't guarantee any support, but if you find issues please do report them.

GIT files:
https://drive.google.com/file/d/1O9dHg7QhH4csZ3grRxOyGM8SAeOHm4kA/view?usp=sharing" rel="nofollow - https://drive.google.com/file/d/1O9dHg7QhH4csZ3grRxOyGM8SAeOHm4kA/view?usp=sharing

Images/Layout graphics files that associate control to function:
https://drive.google.com/file/d/1ovNR9BUFxqbbxh_dXAUTV-58YR4bSdcY/view?usp=sharing" rel="nofollow - https://drive.google.com/file/d/1ovNR9BUFxqbbxh_dXAUTV-58YR4bSdcY/view?usp=sharing

A couple of warnings, move the RP46 rotaries slowly when using VOL1 and VOL2 and AP ROLL. The clock mapping sometimes works and sometimes doesn't work, I haven't been able to determine why. The EGT peak dial is NOT mapped, I talked to Martyn and I could not locate the DataRef he suggested should exist for the peak/needle ... shame since lean peak is part of the checklist process for this aircraft, oh well, have to use the mouse.

Cheers, Rob


Print Page | Close Window