Print Page | Close Window

Constant Start Sounds

Printed From: Just Flight Forum
Category: Just Flight Products
Forum Name: VC10 Jetliner
Forum Description: Discussion area for VC10 Jetliner
URL: http://forum.justflight.com/forum_posts.asp?TID=31952
Printed Date: 25 Apr 2024 at 3:54am


Topic: Constant Start Sounds
Posted By: jimos87
Subject: Constant Start Sounds
Date Posted: 10 Dec 2017 at 10:55am
Just something I need to ask not just on the VC-10 but this is the one I'm in at the moment, I'm on the ground I chose cold and dark all fuel pumps are off but power is on but I hear constant start sounds from the engines, any ideas


Replies:
Posted By: helixkingdom
Date Posted: 10 Dec 2017 at 1:08pm
Toggle sound off/on. It may help.

Posted By: vanhelsing
Date Posted: 10 Dec 2017 at 1:29pm
Hi
I have the same problem. After loading the VC10 I have to press cold and dark for 10 or 15 times before reacting. After landing, the engines can not be completely shut down. The speed does not drop any further than to 30%. Afterwards a constant restart sound of the engines can be heard

Regards
Chris

Posted By: trindade
Date Posted: 10 Dec 2017 at 9:29pm
No problems here. After I choose cold&dark all goes quiet after a few seconds and all systems are off. Not sure what should be the problem!
But when I have systems on and open the fuel/payload page, when i come back to the virtual cockpit i've no sounds,  I need to go to external view and come back to have vc sounds again. Anyone else with this problem?
BTW: beautiful work on this beauty JustFlight team. Please keep the good work. Thank you.

Posted By: Martyn
Date Posted: 11 Dec 2017 at 8:58am
Have you submitted a support ticket?

After loading the aircraft, did you make sure that the engines were stabilised at idle before selecting cold & dark? You may find that the change in state doesn't take full effect if not.

Thanks
Martyn


-------------
Martyn
Just Flight Ltd

Posted By: vanhelsing
Date Posted: 11 Dec 2017 at 11:28am
Hello Martyn,

Thanks for your help. Cold and dark works when the engines are stabilized. But after landing, the engines can not be turned off. N1 only drops to 30%, constant start sound and AES does not start. AES shows the message that the engines still need to be shut down

Regards
Chris


Print Page | Close Window