"No Weather API" despite AS for P3Dv4 installed a
Printed From: Just Flight Forum
Category: Just Flight Products
Forum Name: TB10 Tobago and TB20 Trinidad
Forum Description: Discussion area for TB10 Tobago and TB20 Trinidad
URL: http://forum.justflight.com/forum_posts.asp?TID=31723
Printed Date: 19 Apr 2024 at 10:38pm
Topic: "No Weather API" despite AS for P3Dv4 installed a
Posted By: altack
Subject: "No Weather API" despite AS for P3Dv4 installed a
Date Posted: 19 Sep 2017 at 1:21pm
|
Hi Guys, just installed the latest v2.00 TB10& TB20 with P3Dv4. I also have ASforP3Dv4 up and running (well) but, when switching on the stormscope, after the self-test, the message shown on the bottom screen reads "No Weather API". Any help would be appreciated. Regards, Francois |
Replies:
Posted By: Chock
Date Posted: 19 Sep 2017 at 3:11pm
|
Yup, had the weather scope working on the FSX-SE version with Active Sky Next, but I also get 'No Weather API' displaying on the scope with P3D V4. I hope this is a glitch, and not a case of the P3D V4 version of the TB-10/20 not working with the most recent version of Active Sky, because if it is, then it's a step backwards. Other problems...
I've noticed that it is very tough on resources too, far more than one would reasonably expect given that it's a GA aeroplane. I realise it is fairly high res and has a lot of 3D modeling in the VC instruments etc, but so does the new PA-28 and that performs much more as one would expect, one would hope that could be looked at. More critically, I noticed that some variants crash the sim, whereas others don't, for example, the green British Golf-registered version of the TB-20 bombs P3D V4 every time you try to load a flight, whereas the Portuguese Blue/Yellow Charlie-Sierra-registered version of the same TB-20 loads up every time. Not sure why that would be so, but it is the case every time. |
Posted By: McGoose
Date Posted: 29 Sep 2017 at 11:31am
|
Same here, "No Weather API" with ASP4. Has anyone got this working with Active Sky? |
Posted By: Martyn
Date Posted: 29 Sep 2017 at 11:45am
|
We're currently looking at various changes to the Active Sky API that need to incorporated into the Stormscope. More news on that soon. The crashing issue should no longer occur following an update earlier this week. Thanks Martyn ------------- Martyn Just Flight Ltd |
Posted By: Martyn
Date Posted: 03 Oct 2017 at 3:22pm
|
The Stormscope gauge in the TB10/TB20 has been updated to work with Active Sky for P3D v4 ( http://www.justflight.com/support/tb10-tb20/f9351be" rel="nofollow - http://www.justflight.com/support/tb10-tb20/f9351be ). You can download the latest installer from your Just Flight account. Thanks Martyn ------------- Martyn Just Flight Ltd |
Posted By: McGoose
Date Posted: 04 Oct 2017 at 8:37am
Thank you very much, works fine now.  |
Posted By: altack
Date Posted: 06 Oct 2017 at 1:17pm
|
Thanks Martyn, the API is now found but... the stormscope screen is behaving like a radar screen and not showing crosses for each thunder flash ? like on this screen capture below: http://i1371.photobucket.com/albums/ag281/altack/JF_TB10_Stormscope_screen_zpsr9ktuyc5.jpg" rel="nofollow - http://i1371.photobucket.com/albums/ag281/altack/JF_TB10_Stormscope_screen_zpsr9ktuyc5.jpg |
Posted By: bobbysweatpants
Date Posted: 21 Feb 2018 at 4:44pm
|
I have the 'NO API' issue too with ASP3D but I just purchased this. Fairly certain I'm on the most updated version. |
Posted By: Rich
Date Posted: 21 Feb 2018 at 4:53pm
|
Hi, Please drop the support team a message via www.justflight.com/support and they will be able to investigate for you. Thanks Rich ------------- http://www.facebook.com/#!/pages/Just-Flight/15266573498" rel="nofollow">  |