PA-28R Arrow/Turbo Arrow III/IV and Warrior II - Flight plan using the GTN650

Print Page | Close Window

Flight plan using the GTN650

Printed From: Just Flight Forum
Category: Just Flight Products
Forum Name: PA-28R Arrow/Turbo Arrow III/IV and Warrior II
Forum Description: Discussion area for the PA-28 aircraft (PA-28 Arrow III, Turbo Arrow III/IV and Warrior II)
URL: http://forum.justflight.com/forum_posts.asp?TID=31532
Printed Date: 26 Apr 2024 at 1:09am

Topic: Flight plan using the GTN650

Posted By: anthonye
Subject: Flight plan using the GTN650
Date Posted: 12 Jun 2017 at 5:30pm

I have just made a flight plan in the Gtn but I can't seem to get it to follow it using the Gtn 650.

I have changed the Gtn to GPS and the nav1/nav2 switch on the panel by middle/clicking so it says gps.

Also put the autopilot on and selected the switch to Nav, is it built in to follow the plan or will it only follow the built in GPS, unless I'm missing something.

Does not follow the flight plan at all.

Looked at the manual but I thought I have done what is needed.

Anthony

Replies:

Posted By: Lewicide
Date Posted: 13 Jun 2017 at 8:06am

Check that you have a Gtn.cfg file in the plane folder
If not use the gtn manager to sdd one.

Print Page | Close Window