Default ATC and Hawk Radio
Printed From: Just Flight Forum
Category: Just Flight Products
Forum Name: Hawk T1/A Advanced Trainer
Forum Description: Discussion of our Hawk T1/A
URL: http://forum.justflight.com/forum_posts.asp?TID=31196
Printed Date: 27 Apr 2024 at 6:57am
Topic: Default ATC and Hawk Radio
Posted By: Blaunarwal
Subject: Default ATC and Hawk Radio
Date Posted: 27 Dec 2016 at 2:07pm
|
Hi How do I have to set up the radio, to ask for takeoff and landing permission? The ATC Window selection does just keep the same state, like if I had no power. The radio has power but I also read here there's an avionic master switch. Didn't see that. Can anyone help me please. Dan
|
Replies:
Posted By: Delta558
Date Posted: 27 Dec 2016 at 5:19pm
|
As long as you have power to the electrics (engine running, DC reset button a little way below the radio and check that the needle moves from left to right on the associated gauge), then selecting 'main' on the left hand button of the radio panel should get you talking to people! Cheers, Paul. |
Posted By: Blaunarwal
Date Posted: 28 Dec 2016 at 7:33pm
| Negativ! Maybe it's P3D3.4. The ATC Menu remains at the same state, doesn't go further. I thought it must be a setting in the radio. |
Posted By: Delta558
Date Posted: 28 Dec 2016 at 8:18pm
|
Strange, that's the sim I tested it in. Try starting the aircraft using the hidden clickspot bottom left of the shift menu then repeat the DC reset and 'main' selection on the radio - it may be that there is something in the quickstep additional to the startup procedures. Worth a try if only to eliminate it. |
Posted By: Blaunarwal
Date Posted: 28 Dec 2016 at 8:56pm
|
Shift Menu is no expression found in the manual. So how should I find it? There's a shift 2,3, and 4 window.
While trying I found, if I hit the key 1 for the ground station repeatedly, I get into the following menu, for the following taxi to takeoff options. But that's not a way to sim. If I change aircraft, there's no problem.
|
Posted By: Delta558
Date Posted: 28 Dec 2016 at 9:02pm
Sorry, was writing that on my phone and must have missed the lack of number Shift+2 is the menu I meant, right down in the bottom left corner below all the icons you should find the hidden clickspot. |
Posted By: Blaunarwal
Date Posted: 28 Dec 2016 at 9:13pm
|
Here is how it behaves. In the ATC Window you will see some blinking, when I try to select an option and then loading the JF Tornado, it works as expected https://youtu.be/4fI3Y8DV9Ns" rel="nofollow - https://youtu.be/4fI3Y8DV9Ns P.S. I just know, P3D3 ATC Radio doesn't work, without power e.g. FSX did not have this feature if I remember right.
|
Posted By: Delta558
Date Posted: 28 Dec 2016 at 9:30pm
|
Wrong radio to get ATC - try the one in the pic below, set the far left button to 'main'. I could see in your vid that it is set to 'OFF'. http://s956.photobucket.com/user/delta558/media/UHF.jpg.html" rel="nofollow">  |
Posted By: Blaunarwal
Date Posted: 28 Dec 2016 at 9:37pm
|
Great, that's it! Thanks a lot. I never saw this button, was always switching on the right hand side radio. Dan
|
Posted By: Delta558
Date Posted: 28 Dec 2016 at 9:41pm
|
You're welcome, glad you're up and running! Paul. |