Print Page | Close Window

Canopy Fogging

Printed From: Just Flight Forum
Category: Just Flight Products
Forum Name: English Electric Canberra PR.9
Forum Description: In-development area
URL: http://forum.justflight.com/forum_posts.asp?TID=28400
Printed Date: 12 Nov 2019 at 2:49pm


Topic: Canopy Fogging
Posted By: woody901
Subject: Canopy Fogging
Date Posted: 11 Nov 2015 at 3:14pm
I have installed the latest version (SP3) of the Canberra and have since had some problems with canopy fogging. On the two flights I have tried so far the canopy has fogged up. The second time while I was still on the ground, starting the engines and with the canopy open. The problem I have is that I am unable to demist the canopy. I have the demist knob pulled out, canopy heat switch on and air to cabin buttons on but even after half an hour the canopy is still misted and I am unable to see through it. Has the coding to this changed because this was not a problem for me before this version.
Hope you can help
Mick


-------------
Mick Wood



Replies:
Posted By: woody901
Date Posted: 12 Nov 2015 at 2:09pm
Well I have to report that I have tried to re-create this problem and have failed. The Canberra performed perfectly for me in all conditions in other flight so I shall put this down to 'one of those things'

Thanks Martin for your reply to my support request

Mick Wood


-------------
Mick Wood


Posted By: Jim610
Date Posted: 12 Nov 2015 at 2:14pm
I also suffered badly with a fogged canopy which suddenly, and rather unrealitically I might add, cleared at 300' on finals.  The demist knob had been pulled for a lot of the flight and all of the decent.

Jim


Posted By: Jason210
Date Posted: 25 May 2016 at 9:07am
Don't know if it's a problem or me, but mine is fogged up too.

For more than half-an-hour, it has been set to:

- canopy: ON
- engine air to cabin Nos. 1 & 2: ON
- cabin air: WARM
- demist knob: OUT (ON).

I can see a little bit but it's still badly "misted".


Posted By: Martyn
Date Posted: 25 May 2016 at 10:36am
Hi Jason,

Please contact our support team and we'll look into this.

Thanks
Martyn




-------------
Martyn
Just Flight Ltd


Posted By: BugDani
Date Posted: 06 Apr 2018 at 9:59pm
Hi,

sorry but I have the same problem: Unable to demist the canopy ( even after opening !)

BugDani.


Posted By: BugDani
Date Posted: 07 Apr 2018 at 1:58pm
Originally posted by BugDani BugDani wrote:

Hi,

sorry but I have the same problem: Unable to demist the canopy ( even after opening !)

BugDani.


At this time, I've just re-named the fogged canopy textures (Inside and out side) and it's OK!


Posted By: Viking01
Date Posted: 10 May 2018 at 6:51pm
Same problem here. Renaming the textures seems to be the only solution...

-------------
Regards
Gunter


Posted By: timmee62
Date Posted: 16 May 2018 at 9:10am
I have noticed that changing the small knob on the right of the GPS changes the fogging on the canopy...



Print Page | Close Window