Print Page | Close Window

DC-3 operation explained

Printed From: Just Flight Forum
Category: Just Flight Products
Forum Name: DC-3 Legends of Flight
Forum Description: Discussion area for DC-3 Legends of Flight DVD and downloads
URL: http://forum.justflight.com/forum_posts.asp?TID=23800
Printed Date: 27 Apr 2024 at 7:28am


Topic: DC-3 operation explained
Posted By: goldratte
Subject: DC-3 operation explained
Date Posted: 24 Jan 2015 at 5:39pm
Hi!

I have some questions regarding the operation of the JustFlight DC-3- to bring this out at the beginning- I am new to flight sims AND I have read the manual (which leaves much to wish for...). Before I got the JustFlight DC-3 I had approximately ten hours in the MS FSX default Cub, Cessna and DC-3.
I'd appreciate if someone could take some time to answer my questions!

- How do I adjust the NAV/ADF radio frequency to VOR/DME points? If I turn the range knob to 100-190 kHz, the frequency selection wheel goes blank.
- Where do I adjust the COMM frequency?
- When I use feathering I have to restart the engine to come up on the revs again? Is this the same in RW?
- Why do the parameters between the engines vary so much, although they run under equal settings? Is this just an attempt to simulate RW plane or can this be optimized?

Thank you very much for your help!

Goldratte


Replies:
Posted By: Expire
Date Posted: 10 Aug 2015 at 10:09am
Are you still looking for answers or have you sorted this out in the interim?  I am by no means an expert but for a couple hours last night I was testing out the navigation systems.
 
Mike


-------------
Best regards

Mike Reardon


Print Page | Close Window