• Announcements regarding our community

    2 Topics
    8 Posts

    @skrysl No. Microsoft runs promotions from time to time but the when and what is down to them.

  • Please use this link to gain technical support for any of our products

  • A place to talk about whatever you want

    126 Topics
    319 Posts

    @GunStrauss said in Black Square Analog Baron Fuel Pump Lvars:

    I can upload a profile when I get home in a couple of days, may I ask what controllers you use?

    I'm not sure what you mean by "controller". I think my answer should be "None".
    I have built a cockpit in which I have replicated the pilot's side of the 3D image you see in the Baron in FS2020. So I have physical switches connected to a Leo Bodnar board (BU0836X) and I am using SPAD.neXt to handle the switch inputs for me.

    I have been busy researching and have got it working satisfactorily. I discovered that I have to turn on the correct electrical circuit as well as switch the pump on.

    “A:CIRCUIT SWITCH ON:4, bool”, and “A:CIRCUIT SWITCH ON:5, bool”

    So, for the left pump switch:

    “Set LVAR:VAR_FUEL-SWITCH_PUMP_1 to #"; where # is the state of the switch. 0=Off, 1=Low, 2=High.'

    and Set CIRCUIT_SWITCH_ON:4 to 1 (or 0 for off)

    For the right pump switch:

    Same as above except use “Set LVAR:VAR_FUEL-SWITCH_PUMP_2” and

    for the electrical circuit use “Set CIRCUIT_SWITCH_ON:5 to 1” (or 0 as appropriate)

    Everything is now working as it should.
    Cheers!

  • 5k Topics
    25k Posts

    No, not at all! It's been a great discovery adventure for me.
    Yes, the honeycomb stuff does seem difficult, especially, for me anyway, the Autopilot setup.
    I have puzzled over why I couldn't find such a thing as a repository. Cheers, I have saved the URL in my Favorites.
    You have the X52 and I still use my original Saitek Pro Flight Yoke!
    You might be relieved to hear that all my switches are working. I can start my sim "Cold and Dark" for the first time in years. Very nice. Thanks for your friendly help.
    Very, very much appreciated.

  • For all discussion relating to train simulation and Just Trains products

    141 Topics
    314 Posts

    I don't mind the gates too much, since from the cab you see them along then an approximation's OK with me there, considering the engine TS runs on I imagine every saving has to be made in other directions to maximise the quality of the forward view. In the same way my house is at a rather funny angle (although you can't even see it from the railway, so I was pleasantly surprised when it appeared at all on the Hope Valley route).

    I agree Middlewood station looks a bit on the busy side though :)

  • Got a suggestion or some feedback for us? Drop it in here and we'll take a look!

    126 Topics
    285 Posts

    Hi,

    Apart from the ac already in development (F100/A300/747-200), I hope one day we can add the 737-200 to the ever growing list of great classics developed by Justflight.

    Not sure what type of cdu this is in the pic, but it would make a great aircraft to be retrofitted with your upcoming UNS1.
    https://www.airliners.net/photo/Sriwijaya-Air/Boeing-737-284-Adv/1663597/L

    Cheers,

    Luc

  • Looking for an old post? We've kept them on the old forum.