AI Crashes into Terrain in Mountains |
Post Reply |
Author | |
freddy
Chief Pilot Joined: 29 Nov 2008 Location: Melbourne, Aust Points: 1339 |
Post Options
Thanks(0)
Posted: 26 Apr 2009 at 10:58pm |
For the greatest realism, you may wish to increase aircraft altitude settings only for planes that are actually capable of flying at high altitudes. In other words, planes that have pressurised cabins. Obviously this is true of commercial airliners. But it is not true of all of the GA aircraft. For example, having a Cessna 152 flying at 30,000 is not realistic. A Cessna Caravan would be OK, and perhaps the Beech Baron (Microsoft don't tell us what model of Baron it is, so I suppose it is fair to "pretend" it is a model that has a pressurised cabin). And, of course, it is not just about pressurised cabins, it is about engines that are capable of handling thinner and colder air at alititude as well. Not to mention airframes that have anti-icing capability. And so on and so forth.
One of the problems for small planes at airfields that are at high altitude (airfields in the mountains) is the fuel/air mix. A cessna will struggle to takeoff and climb at a good rate if the fuel/air mix is not adjusted correctly by the pilot. Without the takeoff and climb-out power that would usually be available at sea level, takeoffs in the mountains can be a problematic. If you want the realism, do some research on the planes and see which of them are designed to fly at altitude. Then set the maximum altitudes realistically. Adjust the flight plans of the others so their routes will not mean they have to try to climb up over mountains.
|
|
Soaranden
P1 Joined: 14 Feb 2009 Points: 627 |
Post Options
Thanks(0)
|
There was some discussion of aircraft altitudes in this forum at "Is Fleet Database screen only for Random Traffic?" There are many Traffic X aircraft that have their maximum altitude set at 10,000 feet. To avoid the mountain crashes you have observed, you will probably have to increase aircraft altitude settings.
|
|
apollon01
Ground Crew Joined: 16 Oct 2008 Points: 56 |
Post Options
Thanks(0)
|
Hello,
After some flying in Swiss Alpes I noticed that in some mountain airfields the AI crashes into high terrain after take off or during approach (I noticed that while I was cleared to land after a plane on base leg that never arrived - to my great surprise there were rescue helicopters taking off and flying to the crash site... just kidding ).
Any idea if it is possible to influence the way the planes arrive or depart so that they survive their departure or approach?
Thanks.
Milan
|
|
Post Reply | |
Tweet
|
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |