Shockwave A2A 3D Lights Redux / Traffic 360 |
Post Reply ![]() |
Author | |
vortexwake ![]() Check-In Staff ![]() Joined: 19 Jul 2018 Points: 15 |
![]() ![]() ![]() ![]() ![]() Posted: 15 Aug 2018 at 1:17pm |
Hi Would like to know if anybody has successfully installed the Shockwave A2A 3D Lights Redux mod into Traffic 360 ai aircraft I understand the procedure of copying the default light settings in the config file in the event that reverting back to it becomes necessary....and creating the modified light settings using the appropriate Shockwave line entries in order to achieve the new lighting effects....but wanted to inquire as to whether or not merging the A2A 3D lights Redux mod into T360 was in fact possible before attempting to start the process....it's a long list of AC that would require the changes being made to the lights section of the config file in order to complete this If anybody has applied the A2A 3D Lights Redux mod to their T360 ai aircraft and is willing to share the modified lights section of the config files....that would be great....but if I could simply get an assurance that adding this mod is possible....that would provide me with enough incentive to begin the process The A2A website forum provides many reconfigured lights sections that users of 3D Lights Redux have posted for other users of the product who wish to apply the modified lights section to their aircraft.....but most of these appear to be for stand alone aircraft applications....not so much for complete ai traffic programs like T360.....one poster was supplying a link for reconfigured light sections for UT....but for reasons unknown the link had been disabled.....not that it would have been useful for attempting to reconfigure T360 lighting.....but still somewhat interesting that it had been disabled Lastly....I notice that in the config file lights section of all ai aircraft in T360.....that there is a specific line inserted as the very last line of the lights section: light.7 = 1, 0, 0, 0, fx_TS_LJet , Taken for the A300 config lights section as seen below [LIGHTS] //Types: 1=beacon, 2=strobe, 3=navigation, 4=cockpit, 5=landing light.0=3, -12.63, -73.43, 5.545, fx_navredm , light.1=3, -12.63, 73.43, 5.545, fx_navgrem , light.2=3, -87.38, 0.00, 8.610, fx_navwhih , light.3=2, -12.63, -73.43, 5.545, fx_strobeh , light.4=2, -12.63, 73.43, 5.545, fx_strobeh , light.5=1, 15.264, 0.00, 11.435, fx_beaconh , light.6=1, 15.264, 0.00, -7.309, fx_beaconh , light.7 = 1, 0, 0, 0, fx_TS_LJet , Can anyone advise what this line entry makes reference to in relation to the lighting and also if this line would be required in a modified lights section with the A2A 3D lights Redux mod applied Thanks |
|
![]() |
|
Mach 2 ![]() Check-In Staff ![]() Joined: 21 Aug 2018 Points: 14 |
![]() ![]() ![]() ![]() ![]() |
I just started this project myself on Traffic 360.
For your example, this is what I would do. 1> BACKUP ENTIRE Traffic 360 folder so you will have copy of original lights. 2> Add the complete "Types" to the first line to assist you in modifying. 3> Simply copy and paste "_shockwave" right after the fx. 4> Look inside your effects folders and you will see all the available shockwave lights. You will have to remove the "m" & "h" from the end of the nav lights since there is no shockwave equivalent. 5> I'm not messing with the "fx_TS_LJet", it looks like a Beacon light and a function of Traffic 360.. 6> By all means, TEST before you continue to insure all the lights work. 7> You can come back later and fine tune the lights by changing the end of the particular light according to the available shockwave lights. THIS... [LIGHTS] //Types: 1=beacon, 2=strobe, 3=navigation, 4=cockpit, 5=landing light.0=3, -12.63, -73.43, 5.545, fx_navredm , light.1=3, -12.63, 73.43, 5.545, fx_navgrem , light.2=3, -87.38, 0.00, 8.610, fx_navwhih , light.3=2, -12.63, -73.43, 5.545, fx_strobeh , light.4=2, -12.63, 73.43, 5.545, fx_strobeh , light.5=1, 15.264, 0.00, 11.435, fx_beaconh , light.6=1, 15.264, 0.00, -7.309, fx_beaconh , light.7 = 1, 0, 0, 0, fx_TS_LJet , CHANGE TO THIS... [LIGHTS] //Types: 1=beacon, 2=strobe, 3=navigation, 4=cockpit, 5=landing, 6=taxi, 7=recognition, 8=wing, 9=logo, 10=cabin light.0=3, -12.63, -73.43, 5.545, fx_shockwave_navred , light.1=3, -12.63, 73.43, 5.545, fx_shockwave_navgre , light.2=3, -87.38, 0.00, 8.610, fx_shockwave_navwhi , light.3=2, -12.63, -73.43, 5.545, fx_shockwave_strobe , light.4=2, -12.63, 73.43, 5.545, fx_shockwave_strobe , light.5=1, 15.264, 0.00, 11.435, fx_shockwave_beaconH , light.6=1, 15.264, 0.00, -7.309, fx_shockwave_beaconH , light.7=1, 0, 0, 0, fx_TS_LJet , I'm looking for a way to bulk change the lights all at once to save some typing. I see there is Notepad ++ that has advanced functions but I just got it myself. |
|
![]() |
|
vortexwake ![]() Check-In Staff ![]() Joined: 19 Jul 2018 Points: 15 |
![]() ![]() ![]() ![]() ![]() |
Hi I suspect that your probably correct regarding having to manually edit the ai aircraft config lighting in order to apply the Shockwave 3D Lights Redux mod I created a post on the A2A website forum putting out a request for any modified lighting configurations that any of the users of the product may have had available after applying the mod which would have allowed for a much quicker cut/paste option to make the changes....but it didn't generate any responses....so it would appear that editing the ai aircraft lighting configs to apply the Shockwave lighting effects will have to be completed by changing each ai aircraft config lighting one at a time Regards
|
|
![]() |
|
Mach 2 ![]() Check-In Staff ![]() Joined: 21 Aug 2018 Points: 14 |
![]() ![]() ![]() ![]() ![]() |
You probably have used the "Replace" function in Notepad.
You can for example find "fx_navredm" and replace it with "fx_shockwave_navred" So now we need to be able to do this several times for each of the different lights, and that's what a macro would do. That's why I was looking at Notepad ++ (Free download, search google for it), it has a macro function. You could make a macro for the first aircraft.cfg, then use it to do all the Traffic 360 models. You can open several aircraft.cfg's at once, so its possible to do several at a time. Now just need to try it out. Backups for sure on the originals. EDIT: I tried Notepad ++ on a sample aircraft.cfg. Macro - Start recording Do a Replace on each light type as above Macro - Stop recording Macro - Save current recorded macro Then run the macro on the next aircraft cfg and be amazed on how quickly you will be able to add the Shockwave lights to your Traffic 360! ![]() |
|
![]() |
|
vortexwake ![]() Check-In Staff ![]() Joined: 19 Jul 2018 Points: 15 |
![]() ![]() ![]() ![]() ![]() |
Hi Thanks for the update regarding the use of Notepad ++ to make the required changes in the ai config files for the installation of the Shockwave lighting mod Will take a look at the Notepad ++ download Regards
|
|
![]() |
|
Mach 2 ![]() Check-In Staff ![]() Joined: 21 Aug 2018 Points: 14 |
![]() ![]() ![]() ![]() ![]() |
I'm DONE did the whole Traffic 360 folder!
These are all the lights that came up in all the different aircraft.cfg's You can change the tailing character to adjust the light type to your preference. Look at the Shockwave .PDF Macro - Start recording FIND MATCH REPLACE ALL THEN HIT fx_navred fx_shockwave_navred CTRL+HOME fx_navredm fx_shockwave_navred CTRL+HOME fx_navgre fx_shockwave_navgre CTRL+HOME fx_navgrem fx_shockwave_navgre CTRL+HOME fx_navwhi fx_shockwave_navwhi CTRL+HOME fx_navwhih fx_shockwave_navwhi CTRL+HOME fx_strobe fx_shockwave_strobe CTRL+HOME fx_strobeh fx_shockwave_strobe CTRL+HOME fx_beacon fx_shockwave_beacon CTRL+HOME fx_beaconh fx_shockwave_beaconH CTRL+HOME fx_vclight fx_shockwave_vclight CTRL+HOME Then finally do a FIND [LIGHTS] Macro - Stop recording Macro - Save current recorded macro as "Shockwave 3D Install" or whatever you like. Run macro on all your AI aircraft.cfg's will end up stopping at the {LIGHTS] section. Make any further manual edits if you want and save if OK. You will also be able to use this macro to add shockwave lights to ANY user aircraft as well. GOOD LUCK!! P.S The LANDING LIGHTS are a built in function of Traffic 360 and come on when taking off or landing. |
|
![]() |
|
vortexwake ![]() Check-In Staff ![]() Joined: 19 Jul 2018 Points: 15 |
![]() ![]() ![]() ![]() ![]() |
Hi Glad to hear that you were able to get the Shockwave lighting effects applied to the T360 ai traffic config files I also managed to complete this task but used the standardized notepad application using a template with the Shockwave lines to be edited and ran through the config files changing them via cut/paste...I encountered some difficulties in attempting to use the Notepad ++ application with the tool functions and decided against spending too much time sorting that out in favor of just getting the config files changed....I do have the Notepad ++ application downloaded and will try to work with it again for any future uses As for the results of the ai aircraft with the Shockwave mod applied...no doubt it provides a much better appearance than the default lighting.....but found that in some cases the changes weren't as significant....I believe this is more a result of the models used to create the ai aircraft in T360 as opposed to the Shockwave mod itself....but again still an overall improvement over the default lighting Regards |
|
![]() |
|
Mach 2 ![]() Check-In Staff ![]() Joined: 21 Aug 2018 Points: 14 |
![]() ![]() ![]() ![]() ![]() |
Definitely a bit of a learning process with Notepad++, but I needed it to do other aircraft.cfg modifications, so I pressed on
![]() Adding the Shockwave lights was very quick with the macro, open the aircraft.cfg, run the macro (1 Click!), then save. Ran into a few special cases (1 aircraft.cfg had 2 conflicting [LIGHTS] sections). Glad to hear you got yours going as well. Don't forget you can go back and change a parameter (tailing character) for each light so maybe using a larger light for a certain aircraft will get the result you want. |
|
![]() |
|
vortexwake ![]() Check-In Staff ![]() Joined: 19 Jul 2018 Points: 15 |
![]() ![]() ![]() ![]() ![]() |
Hi Yes the Notepad ++ application has a definite learning curve....but I'll continue to experiment with it until I get it figured out....I can see the benefit of using it when making multiple changes to config files becomes necessary There likely will be some fine tuning to be carried out in the form of changing a few tailing characters on certain aircraft lights to get the desired result....but that's the benefit of using the Shockwave lighting....and can be completed pretty quickly as the aircraft lighting in question is noticed The primary objective was to get the Shockwave mod applied to the T360 ai aircraft to improve the default lighting....which as I stated earlier provides a marked improvement Thanks again for letting me know about the Notepad ++ application Regards
|
|
![]() |
|
Mach 2 ![]() Check-In Staff ![]() Joined: 21 Aug 2018 Points: 14 |
![]() ![]() ![]() ![]() ![]() |
If anybody is interested, I posted my macro for Notepad++ at AVSIM and FlightSim to install your A2A Shockwave 3D Lights Redux to any aircraft with FSX default lights. I did my entire Airplane/Helicopter folders and all Traffic 360 AI aircraft folders. Just takes a few quick mouse clicks for each aircraft!
This is version 2 with improved light replacement AVSIM https://library.avsim.net/esearch.php?CatID=fsxutil&DLID=206858 |
|
![]() |
Post Reply ![]() |
|
Tweet
|
Forum Jump | Forum Permissions ![]() You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |