Photographic Scenery |
Post Reply | Page 12> |
Author | |
neilb
Check-In Staff Joined: 25 Apr 2008 Location: Blackburn Points: 13 |
Post Options
Thanks(0)
Posted: 26 Nov 2017 at 3:03pm |
Will you be updating your VFR Photographic Scenery for Prepar3d? Neil
|
|
Rich
Just Flight Staff Joined: 31 Mar 2008 Location: Planet Earth Points: 8543 |
Post Options
Thanks(0)
|
You should be able to install the current one fairly easily. Run the installer and install it to a folder somewhere, and then use the Scenery Library to set P3D up to use it.
It's getting pretty long in the tooth though, almost like its time to start thinking about a new version.
|
|
neilb
Check-In Staff Joined: 25 Apr 2008 Location: Blackburn Points: 13 |
Post Options
Thanks(0)
|
Yea I've done that and it works great, just thought you would maybe do something to improve the graphics.
|
|
Christopher Low
P/UT Joined: 07 Nov 2011 Location: Ulverston UK Points: 162 |
Post Options
Thanks(0)
|
That is an interesting comment, Rich. You make it sound like a new version is in development.... |
|
neilb
Check-In Staff Joined: 25 Apr 2008 Location: Blackburn Points: 13 |
Post Options
Thanks(0)
|
Best scenery in the world you gotta believe it. I can be your beta tester! Neil
|
|
Busterbvi
Ground Crew Joined: 28 May 2015 Points: 60 |
Post Options
Thanks(0)
|
Neilb & Rich.
I have Horizon VFR Photo Scenery GenX vol 1,2 & 3 version 3. I hear it works OK in V4.1. How do I install and set it up so the VFR GenX folder is outside the sim ? My skills at this stuff are limited so a numpty style guide would be welcome ! Same question for UK2000 Airports ? Thanks.
|
|
Asus Z87. i7 4770k. 8 GB DDR3 @ 1866 mhz. GTX980ti SC. 120 GB SSD. 1TB Evo SSD. 750W PSU. W7/64. Dell 32'' 4K Monitor. 2 Lazy Boyz & Lap dancing facilities.
|
|
neilb
Check-In Staff Joined: 25 Apr 2008 Location: Blackburn Points: 13 |
Post Options
Thanks(0)
|
I'm not sure with horizon but I thin the installation program looks for fsx.exe to install if I remember, it's a while since I used it. maybe you have fsx on your computer if so install it through that that then simply point the scenery library in Prepar to that folder.
|
|
Busterbvi
Ground Crew Joined: 28 May 2015 Points: 60 |
Post Options
Thanks(0)
|
Thanks Neil. I created a new folder on my G: drive where all things flight sim live and named it P3D VFR GenX, I dumped FSX so the Horizon installer placed all the files in there no problem. Is it now a simple case of going into the P3DV4 scenery library, "Add Area" browse to it or enter this, G:\P3D VFR GenX as the new area name ?
Rich, please jump in and let me know how you did it ? |
|
Asus Z87. i7 4770k. 8 GB DDR3 @ 1866 mhz. GTX980ti SC. 120 GB SSD. 1TB Evo SSD. 750W PSU. W7/64. Dell 32'' 4K Monitor. 2 Lazy Boyz & Lap dancing facilities.
|
|
neilb
Check-In Staff Joined: 25 Apr 2008 Location: Blackburn Points: 13 |
Post Options
Thanks(0)
|
Good glad it worked. Neil
|
|
Busterbvi
Ground Crew Joined: 28 May 2015 Points: 60 |
Post Options
Thanks(0)
|
Hi Neil, not working yet, note my question to you in my last post.
|
|
Asus Z87. i7 4770k. 8 GB DDR3 @ 1866 mhz. GTX980ti SC. 120 GB SSD. 1TB Evo SSD. 750W PSU. W7/64. Dell 32'' 4K Monitor. 2 Lazy Boyz & Lap dancing facilities.
|
|
IanHenry
Ground Crew Joined: 04 Apr 2008 Location: Clitheroe Lancs Points: 51 |
Post Options
Thanks(0)
|
What you will need to do is install FSX temporarily, install your photo scenery, run FSX then go to C/Program Data/Microsoft/FSX and open the scenery cfg file. You will find all the entries for your photo scenery at the bottom of the text, there will probably be quite a few, copy those entries. Then open your P3D scenery cfg file (C/Program Data/Lockheed Martin/Prepar3Dv4) and paste those entries at the end of the text. You will then need to change the numbers on each entry both the [Area.?] and layer? save it and you are then sorted. I'd make a backup of your Scenery.cfg before I alter it if I was you. You can now uninstall FSX. Simple really. Ian |
|
Busterbvi
Ground Crew Joined: 28 May 2015 Points: 60 |
Post Options
Thanks(0)
|
Great, thanks for that Ian. Once I have posted those entries in the P3D cfg file and re-numbered, do I need to make an entry in the P3D Scenery library ? Everything is on my G: drive, a sample entry would be helpful, sorry for the questions but a bit of a beginner at this. My objective is to have my add on scenery outside the sim so it is not disturbed with future updates. Will this method work if I create a stand alone scenery folder outside P3D ? I will be looking to do the same with my add on aircraft.
Cheers. Tim.
|
|
Asus Z87. i7 4770k. 8 GB DDR3 @ 1866 mhz. GTX980ti SC. 120 GB SSD. 1TB Evo SSD. 750W PSU. W7/64. Dell 32'' 4K Monitor. 2 Lazy Boyz & Lap dancing facilities.
|
|
IanHenry
Ground Crew Joined: 04 Apr 2008 Location: Clitheroe Lancs Points: 51 |
Post Options
Thanks(0)
|
No Tim, adding the entries into the Scenery.cfg means that you will not have to add them via the Scenery Manager. I keep my Photo scenery on a different hard drive so that I don't need to re-install it id I re format my computer. I also save a copy of the Scenery.cfg with just a "virgin" copy of P3D and my photo scenery added so that I don't have to go through the re numbering process again (sometimes it doesn't work out like that, the virgin cfg for P3D 4.1 had more entries on it than the virgin version 4.0). Here's a copy of the last entry for the "virgin" P3Dv4.1 file and the first couple of entries for my photo scenery, notice the two numbers for each entry and as you can see my photo scenery is located on a drive called "F". If you need anymore help don't hesitate to ask, I'll check back here in a day or two. Regards, Ian [Area.129] Title=Bathymetry Local=Scenery\Bathymetry Layer=129 Active=TRUE Required=FALSE [Area.130] Title=VFR GenX Vol1 Area1 2.4m Photo Scenery v2.0 Local=F:\Program Files (x86)\Horizon Simulation\VFR-Gen-X-2.0\Volume1\Area1\2.4m Photo Layer=130 Active=TRUE Required=FALSE [Area.131]
Title=VFR GenX Vol1 Area1 4.8m Mesh v2.0 Local=F:\Program Files (x86)\Horizon Simulation\VFR-Gen-X-2.0\Volume1\Area1\4.8m Mesh Layer=131 Active=TRUE Required=FALSE |
|
ncooper
Check-In Staff Joined: 04 Dec 2017 Points: 6 |
Post Options
Thanks(0)
|
Hello,
If you make an all in one folder from all the separate folders, you can store the folder anywhere away from the simulator root folder and add the whole of the Horizon range with one library entry.
|
|
Busterbvi
Ground Crew Joined: 28 May 2015 Points: 60 |
Post Options
Thanks(0)
|
ncooper, thanks, I had hoped it would be that simple in V4.1, did an experiment with GenX Vol 1, created a folder outside the sim, browsed to it using the AD AREA feature in the library, no joy.
I will try Ian Henry's suggestion and make the entries into the P3D scenery cfg file with re numbering and see how that goes.
|
|
Asus Z87. i7 4770k. 8 GB DDR3 @ 1866 mhz. GTX980ti SC. 120 GB SSD. 1TB Evo SSD. 750W PSU. W7/64. Dell 32'' 4K Monitor. 2 Lazy Boyz & Lap dancing facilities.
|
|
neilb
Check-In Staff Joined: 25 Apr 2008 Location: Blackburn Points: 13 |
Post Options
Thanks(0)
|
works alright in mine. Neil
|
|
ncooper
Check-In Staff Joined: 04 Dec 2017 Points: 6 |
Post Options
Thanks(0)
|
"I had hoped it would be that simple in V4.1" I have placed all the files from all the volumes into one folder, I named it Photo England&Wales and added it to the scenery library. It is not on the same drive as either FSX or P3D and can be added to either in the same way. |
|
Busterbvi
Ground Crew Joined: 28 May 2015 Points: 60 |
Post Options
Thanks(0)
|
Thanks lads, ncooper, according to your screenie there your photo scenery is in your FSX, Add on Scenery, Western Europe file. Should I try installing mine in FSX, Add On scenery and point the P3D library to that ?
|
|
Asus Z87. i7 4770k. 8 GB DDR3 @ 1866 mhz. GTX980ti SC. 120 GB SSD. 1TB Evo SSD. 750W PSU. W7/64. Dell 32'' 4K Monitor. 2 Lazy Boyz & Lap dancing facilities.
|
|
neilb
Check-In Staff Joined: 25 Apr 2008 Location: Blackburn Points: 13 |
Post Options
Thanks(0)
|
My Farm Strip scenery is just on my ssd drive in a folder called Northern-England then added Justflight's Photographic scenery and I pointed Prepar to them how do I attach a photo? Neil
|
|
ncooper
Check-In Staff Joined: 04 Dec 2017 Points: 6 |
Post Options
Thanks(0)
|
Hello, as I mentioned, the photo scenery is not even on the same (G:) drive as the simulators. Those are folder names that I have assigned. You can name the folders in any way you wish. So long as the main photo scenery folder has one folder named scenery inside it, containing all the .bgl files, the scenery library will recognise it. |
|
Post Reply | Page 12> |
Tweet
|
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |