1011 p3d4 |
Post Reply | Page 12> |
Author | |
roland1504
Check-In Staff Joined: 11 Sep 2017 Points: 9 |
Post Options
Thanks(0)
Posted: 24 Sep 2017 at 7:48am |
after installation I started a flight with a 1011 FMC. Aircraft was loaded. it was impossible to load the ATC route from P3D4 only strange signs came up. So I entered the route manually.
Then P3D4 crashed to desktop. Until now I am unable to load the 1011 FMC. P3D will not load and its running in backround. The INS version is loaded correctly any Ideas? |
|
jimos87
Ground Crew Joined: 04 May 2016 Points: 61 |
Post Options
Thanks(0)
|
In my fmc version i cant click anything or enter anthing
|
|
jimos87
Ground Crew Joined: 04 May 2016 Points: 61 |
Post Options
Thanks(0)
|
is there a way to get the flight 1 gtn to replace the default gps in this plane
|
|
BG497
Check-In Staff Joined: 16 Jun 2014 Location: Manchester Points: 17 |
Post Options
Thanks(0)
|
P3D V4 hangs completely when I select an FMC version. INS versions are fine however. Regards, Mark
|
|
Cheers, Mark
|
|
Martyn
Just Flight Staff Development Manager Joined: 31 Mar 2008 Location: Huntingdon, UK Points: 7615 |
Post Options
Thanks(0)
|
The issue with importing P3D v4 flight plans is being investigated by the developer, as are the CTDs that some users are encountering. We're not aware of any issues with clickspots in the FMC variant though.
Please submit support tickets and our team can then properly log and investigate this. Thanks Martn
|
|
Martyn
Just Flight Ltd |
|
kihew
Check-In Staff Joined: 17 Nov 2011 Location: Lisboa, Portuga Points: 8 |
Post Options
Thanks(0)
|
Hi there,
Anyone noticed that at night the landing lights flood the cockpit? The taxi light does too, to a lesser degree. It's blinding. I also had the weird symbols after importing a flightplan so I had to load it manually. Preparing for my first flight with the Tristar, lets see how it goes.
|
|
ETNWHVAC
Check-In Staff Joined: 26 Oct 2017 Location: USA Points: 2 |
Post Options
Thanks(0)
|
I thought it was just me. Glat to know I'm not crazy after all. Not many people like to flight at night but I'm one of them and yes the cockpit gets Lid Up very bright by turning the landing lights.it's like the aircraft body would be made out of glass
....Hope they can do some about it...is anoying |
|
No One Has Graduated From The School Of LifeAnd Lived To Celebrate It!!!
|
|
walt642
Check-In Staff Joined: 04 Nov 2017 Location: USA Points: 1 |
Post Options
Thanks(0)
|
Just installed L1011 Pro into Prepar3d V4. when I go to program the FMS, nothing goes into the scratchpad when I hit the keys on the FMS or even if I try and use my keyboard. Why? I uninstalled the L1011 and reinstalled to see if that would fix it but it didn't.
|
|
Walt Popowski
|
|
jimos87
Ground Crew Joined: 04 May 2016 Points: 61 |
Post Options
Thanks(0)
|
So just fight released a service pack to address the CTD but ignored the rest of the problem where you can't actually use the FMC because noting gets entered when you click it or have I missed something
|
|
Martyn
Just Flight Staff Development Manager Joined: 31 Mar 2008 Location: Huntingdon, UK Points: 7615 |
Post Options
Thanks(0)
|
No issues have been ignored. We are currently waiting for the external developer (who is currently very busy on their own 787 product) to get back to us with further FMC fixes. Unfortunately these are not issues that we are able to fix.
Thanks Martyn
|
|
Martyn
Just Flight Ltd |
|
Martyn
Just Flight Staff Development Manager Joined: 31 Mar 2008 Location: Huntingdon, UK Points: 7615 |
Post Options
Thanks(0)
|
Please ensure that you have the FMC font installed if you cannot see any inputs/characters in the scatchpad - http://www.justflight.com/support/tristar-professional/db46495
|
|
Martyn
Just Flight Ltd |
|
Chock
First Officer Joined: 22 Mar 2009 Location: The grim north Points: 310 |
Post Options
Thanks(0)
|
Any news on a patch for this thing?
At the moment it's putting the 'just' in Just Flight, as in, it's just barely flyable, but with no working FMC, landing lights which look like you've just dropped a nuclear weapon on Nagasaki and a few other niggles, it's like flying something you've rescued out of a boneyard and not a pleasant experience at all. If it wasn't for the fact that I'd leased it for my fleet in Air Hauler for about 5 million per month, so it's got to pay its way, it'd be permanently in the hangar, and even then each flight is a nightmare, with it being a constant battle not to have the thing piledrive into the runway on landing because the trim is so messed up.
|
|
Martyn
Just Flight Staff Development Manager Joined: 31 Mar 2008 Location: Huntingdon, UK Points: 7615 |
Post Options
Thanks(0)
|
An update has been released to address the FMC flight plan corruption issue - http://www.justflight.com/support/tristar-professional/43079cb
The landing light issue is still being addressed. Thanks Martyn
|
|
Martyn
Just Flight Ltd |
|
bhorsoft
Check-In Staff Joined: 02 Dec 2017 Location: Georgia USA Points: 1 |
Post Options
Thanks(0)
|
Having a problem with engine 2. Scenario & aircraft starts up with all three engines running but engine 2 dies almost immediately. I have installed yesterday's update but...
Rebooted system, restarted P3D v4.1, used both INS and FMC versions, and tried both manual restart and ctrl-E-2 restarts but nothing works. New issue or am I doing something incorrectly?
|
|
ETNWHVAC
Check-In Staff Joined: 26 Oct 2017 Location: USA Points: 2 |
Post Options
Thanks(0)
|
I’m just wondering if anything has been done about the grotesque illumination of the cockpit??? On this new update it does not mentions anything about that!!
|
|
No One Has Graduated From The School Of LifeAnd Lived To Celebrate It!!!
|
|
Martyn
Just Flight Staff Development Manager Joined: 31 Mar 2008 Location: Huntingdon, UK Points: 7615 |
Post Options
Thanks(0)
|
It's not something that we've seen, or seen reported before now, so please contact the support team so we can investigate further. Thanks
Martyn |
|
Martyn
Just Flight Ltd |
|
Martyn
Just Flight Staff Development Manager Joined: 31 Mar 2008 Location: Huntingdon, UK Points: 7615 |
Post Options
Thanks(0)
|
Hi Otniel,
Please see my post above. That issue is linked to the landing lights. Thanks Martyn |
|
Martyn
Just Flight Ltd |
|
nfinger
Check-In Staff Joined: 02 Dec 2017 Location: YSSY Points: 13 |
Post Options
Thanks(0)
|
any idea as to when the cockpit lighting / landing light issue will be addressed? It is impossible to fly at night with this problem. During takeoff with landing lights on gauges are unreadable.
|
|
Norbert Finger
Noble Air HC Australia www.nobleair.net |
|
Martyn
Just Flight Staff Development Manager Joined: 31 Mar 2008 Location: Huntingdon, UK Points: 7615 |
Post Options
Thanks(0)
|
Hi Norbert,
The landing light issue is caused by changes that Lockheed Martin made to the lighting system in P3D v4 and affects all aircraft with landing lights that are rear of the cockpit. We are still investigating how to resolve that issue. Thanks Martyn
|
|
Martyn
Just Flight Ltd |
|
Delta558
First Officer Just Flight FDE Developer Joined: 10 Jun 2012 Points: 383 |
Post Options
Thanks(0)
|
Unless this is something specific to P3Dv4 (which I doubt), I'd say that this is most definitely pilot error - have a read of the manual, or for simplicity head to the following thread: http://forum.justflight.com/forum_posts.asp?TID=31839&title=elevator-trim You're looking for discussion of DLC, and you need to learn how to fly that rather than expecting it to handle as other airliners on approach and then blaming trim when it doesn't. That will probably explain why you 'arrive' rather than land Cheers, Paul. |
|
Post Reply | Page 12> |
Tweet
|
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |