Arrow III Mixture Control |
Post Reply |
Author | |
PieterFriendo
Check-In Staff Joined: 21 Sep 2017 Points: 3 |
Post Options
Thanks(0)
Posted: 21 Sep 2017 at 11:23pm |
I just purchased the new Arrow III and noticed a problem with the mixture control. It doesn't work. Moving the mixture control on the yoke is animated on the screen for the full range of motion but doesn't do anything. The proper way to shut down the engine when ready is to turn off the avionics and then pull the mixture control to kill the engine. I have tried this in P3DV4 and FSX Acceleration and it does not work in either. Anyone else having this problem? How to fix? Thank you for your input.
|
|
Delta558
First Officer Just Flight FDE Developer Joined: 10 Jun 2012 Points: 383 |
Post Options
Thanks(0)
|
I think it is likely that you are not clicking the lever on the mixture control which allows you to bring it back through the gate - bring the lever as far back as you can and then click on the base of the mixture control, you should see the small lever behind move and then you can pull it further back.
|
|
PieterFriendo
Check-In Staff Joined: 21 Sep 2017 Points: 3 |
Post Options
Thanks(0)
|
Thank you very much. I did not see this feature before and have not seen it on other aircraft. Good idea to protect you from accidentally knocking the mixture off when you really don't want to. It is working just as you say.
|
|
Martyn
Just Flight Staff Development Manager Joined: 31 Mar 2008 Location: Huntingdon, UK Points: 7615 |
Post Options
Thanks(0)
|
FYI you can quickly select the fully lean/cutoff position using the Ctrl+F1 key assignment. That automatically depresses the mixture lock.
Interestingly the mixture lock appears to be fitted to only some of the Arrow aircraft, including our research aircraft. Presumably it was fitted due to pilots mistakenly moving the mixture lever instead of the prop lever. Martyn
|
|
Martyn
Just Flight Ltd |
|
theohall
Check-In Staff Joined: 24 Sep 2017 Location: Jacksonville Points: 17 |
Post Options
Thanks(0)
|
While Ctrl-F1 and/or unlocking the mixture lever to shut down the engine works, beyond that the Mixture setting seems to be doing absolutely nothing during flight.
@6000 ft, Fuel flow @ 8.5 gph using throttle, RPM 2200, EGT gauge doesn't move Nothing changes when the mixture lever is at 100%, 75%, 48% (lowest setting with lock in place) Shouldn't changing the mixture change something? https://youtu.be/yU2LaYp2H1Y This is FSW version. Leaning the mixture works correctly in all of the base FSW planes.
|
|
Delta558
First Officer Just Flight FDE Developer Joined: 10 Jun 2012 Points: 383 |
Post Options
Thanks(0)
|
That is odd, because if you fly the aircraft in either FSX or P3D, leaning the mixture gives you both egt and ff change. Therefore, it must be something to do with how FSW handles mixture - I'll have a look and see if I can work out what's going on.
|
|
theohall
Check-In Staff Joined: 24 Sep 2017 Location: Jacksonville Points: 17 |
Post Options
Thanks(0)
|
My apologies. Thanks for the quick reply, but my realism settings reset at some point and I hadn't verified it....
|
|
Post Reply | |
Tweet
|
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |