Still won't start Part II |
Post Reply | Page <12 |
Author | |
anthonye
P/UT Joined: 22 Nov 2016 Points: 124 |
Post Options
Thanks(0)
|
Hi Martyn I have just sent the reply to Martin at tech regarding the tests. I think I may know what was causing it as everything is fine now. I think it is the thing with the fsx default aircraft not being the 172, let me know if you agree when they forward the email to you. May help others. Anthony
|
|
Martyn
Just Flight Staff Development Manager Joined: 31 Mar 2008 Location: Huntingdon, UK Points: 7615 |
Post Options
Thanks(0)
|
Hi Anthony,
Unfortunately I can't reproduce the issue here to confirm that it is caused by the default aircraft being changed, but we typically recommend that the default flight is left untouched as that has been known to cause problems with other products in the past. Thanks
Martyn |
|
Martyn
Just Flight Ltd |
|
anthonye
P/UT Joined: 22 Nov 2016 Points: 124 |
Post Options
Thanks(0)
|
I don't know how it had changed, but seems ok now with the 172 set. I think it's safe to get the turbo now. Anthony
|
|
anthonye
P/UT Joined: 22 Nov 2016 Points: 124 |
Post Options
Thanks(0)
|
Well, I spoke to soon, [QTY] OIL=8.00 BATT=0.02 CHECK=1.23 WRITE_TEST=0 [OPTIONS] GPS=0 DISABLE_SOUNDS=0 DISABLE_FAILURES=0 DISABLE_STATESAVE=0 DISABLE_PANELSEL=0 DISABLE_CFGSAVE=0 It has reset again and also the Turbo is playing up now with power etc. What do you advise now, sit tight or request a refund on them both. No fuel flow, flat battery, no oil Are others who are getting the problems using FSX Boxed or Steam. I am using Steam as I have mentioned before. Anthony |
|
Martyn
Just Flight Staff Development Manager Joined: 31 Mar 2008 Location: Huntingdon, UK Points: 7615 |
Post Options
Thanks(0)
|
Hi Anthony,
Please let Martin know and he can continue his investigation. Alternatively you are of course welcome to have a refund/exchange (Martin can arrange that too). Thanks Martyn
|
|
Martyn
Just Flight Ltd |
|
anthonye
P/UT Joined: 22 Nov 2016 Points: 124 |
Post Options
Thanks(0)
|
Ok Martyn I am just feeling that I am a pain in the backside, really want these to work. I am thinking of putting fsx steam on my other desktop as a basic setup and try that without anything else on there just to see if the same happens Is that possible to install steam on another logged in with the same account, I suppose it would disable this one then. Anthony
|
|
anthonye
P/UT Joined: 22 Nov 2016 Points: 124 |
Post Options
Thanks(0)
|
Everything fine now, sent you a PM explaining. Anthony
|
|
b1bmsgt
Check-In Staff Joined: 13 Mar 2017 Location: USA Points: 14 |
Post Options
Thanks(0)
|
Can you let the rest of us know?
Thank you! |
|
Master Sergeant, USAF, Retired
Former T-33A Crew Chief Former B-1B Crew Chief/Maintenance Expediter Former Learjet Corp. Quality Inspector |
|
anthonye
P/UT Joined: 22 Nov 2016 Points: 124 |
Post Options
Thanks(0)
|
Ok will do tomorrow morning uk time. It may be worth a try certainly worked for me after a lot of trying. Nothing tech about it just different way of loading the saved flight if thats where you have the problem to start. Anthony |
|
anthonye
P/UT Joined: 22 Nov 2016 Points: 124 |
Post Options
Thanks(0)
|
I have just pasted what I sent to martyn. -------------------------------------------------------------------------------------------------------- Spent the last couple of days trying things with this problem, seems odd but this is what I have found. Only thing in the config I have altered and use is below. This works everytime if I follow this procedure, works perfect for the TB10-TB20, Arrow and Turbo version [QTY] OIL=8.00 BATT=11.95 CHECK=1.23 WRITE_TEST=0 [OPTIONS] GPS=0 DISABLE_SOUNDS=0 DISABLE_FAILURES=1 DISABLE_STATESAVE=0 DISABLE_PANELSEL=0 DISABLE_CFGSAVE=0 When loading FS having the default 172 showing in the Free Flight window, leave it as Friday Harbor and Fly Now. When it has loaded, go to the file menu and load the saved flight of Arrows or TB's from there. The saved position loads fine, panel as left and starts ok and averything is it should be. No problems with aircraft whatsoever doing it this way everytime. One thing I have found, only on the non turbo arrow. When starting a new flight and the engine is turned off, it will not start again. But if the flight is saved when it won't start, exit out and change the config to above as it will zero everything. When the flight is loaded as above everything works fine from there on without problems on further saves, just on the non Turbo this happens on for the initial save. I seem to have read awhile ago elswhere this is the correct way if there are problems. May be something on here but tried disabling all addons but that made no difference before this. Anyway, everthing runs perfect now with all of them so I'm happy now. ------------------------------------------------------------------------------------------------------------------------------ I do this now for all payware aircraft just to make sure. Give it a try, you may be lucky Anthony |
|
buspelle
Ground Crew Joined: 27 Dec 2011 Points: 55 |
Post Options
Thanks(0)
|
...Could someone please tell me where i can find the "JF_PA28R.cfg" so I can make the changes to be able to start/fly this thing?
Best Regards Pelle |
|
Martyn
Just Flight Staff Development Manager Joined: 31 Mar 2008 Location: Huntingdon, UK Points: 7615 |
Post Options
Thanks(0)
|
Hi Pelle,
If you need to modify the cfg file then it is found here - C:\Users\[Your username]\AppData\Roaming\JustFlight Thanks Martyn
|
|
Martyn
Just Flight Ltd |
|
Post Reply | Page <12 |
Tweet
|
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |