GTN750 or 650 integration |
Post Reply |
Author | |
Martyn
Just Flight Staff Development Manager Joined: 31 Mar 2008 Location: Huntingdon, UK Points: 7615 |
Post Options
Thanks(0)
Posted: 21 Sep 2016 at 7:11am |
Hi Ed. All information regarding an update, including changes made and new functionality, should be located on the single support entry for that update. A notification of the update's release is posted on forums and emailed to owners, however that links back to that same support entry with the info.
|
|
Martyn
Just Flight Ltd |
|
edpatino
Check-In Staff Joined: 30 Aug 2016 Location: South America Points: 26 |
Post Options
Thanks(0)
|
Thanks Martyn for the information.
It would be a suggestion for you to consider placing all the information on the aircraft in just a single place, like in an updated manual for instance, instead of making difficult to find it everywhere in forums, support notes/entries, etc., etc. Just make life easier for everyone. Now that you mention it, I just knew that the use of the rocker switch in the VC has changed too on SP2, and such information was not easily obtainable either. Cheers, |
|
Martyn
Just Flight Staff Development Manager Joined: 31 Mar 2008 Location: Huntingdon, UK Points: 7615 |
Answer Post Options Thanks(0) |
Hi Ed,
Please read the information contained in the support entry regarding the tool that allows you to switch between the GNS 430 and Flight1 GTN cockpit models - http://www.justflight.com/support/tb10-tb20/f9351be The menu option for switching between the GNS 430, GTN 650 and GTN 750 will only be available if the Flight1 GTN cockpit model has been selected. The manual is in the process of being updated (with the addition of a tutorial), however please note that as mentioned in the support entry the KAP 150 VC clickspots have been altered to match those found on the 2D panel. You can now left click on either the UP or DN portion of the rocker switch rather than left/right clicking. This change was made following feedback from customers. Thanks again for your honest feedback. Hopefully these clarifications will help you to finally enjoy the product as others are, but if not then please feel free to contact our customer service team for a refund.
|
|
Martyn
Just Flight Ltd |
|
edpatino
Check-In Staff Joined: 30 Aug 2016 Location: South America Points: 26 |
Post Options
Thanks(0)
|
Good afternoon:
After updating to Service Pack 2, the "Toggle GNS 430/GTN 650" option has disappeared from the Just Flight menu inside the Add-ons menu of P3D, and also there are no signs of such new GTN750 integration capability, or instructions are not sufficient to have the 650/750 to show or to use. For further information, I'm still using P3Dv3.2 and had to moved yet to the newest P3Dv3.4. I've also observed that the section of the KAP150 Autopilot on the Manual has not been updated, as it should, to show the right/correct operation of the UP/DOWN rocker switch to control the AP vertical mode, as per indications given on this Forum several weeks ago by Martyn. I have to say that this product have disappointed me a lot, as it so far has been a waste of time/money. Ed |
|
Post Reply | |
Tweet
|
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |