Canopy Fogging |
Post Reply |
Author | |
woody901
Check-In Staff Joined: 01 Jul 2009 Location: Stoke. U.K. Points: 25 |
Post Options
Thanks(0)
Posted: 11 Nov 2015 at 3:14pm |
I have installed the latest version (SP3) of the Canberra and have since had some problems with canopy fogging. On the two flights I have tried so far the canopy has fogged up. The second time while I was still on the ground, starting the engines and with the canopy open. The problem I have is that I am unable to demist the canopy. I have the demist knob pulled out, canopy heat switch on and air to cabin buttons on but even after half an hour the canopy is still misted and I am unable to see through it. Has the coding to this changed because this was not a problem for me before this version.
Hope you can help Mick
|
|
Mick Wood
|
|
woody901
Check-In Staff Joined: 01 Jul 2009 Location: Stoke. U.K. Points: 25 |
Post Options
Thanks(0)
|
Well I have to report that I have tried to re-create this problem and have failed. The Canberra performed perfectly for me in all conditions in other flight so I shall put this down to 'one of those things'
Thanks Martin for your reply to my support request Mick Wood
|
|
Mick Wood
|
|
Jim610
Check-In Staff Joined: 26 Jan 2009 Points: 1 |
Post Options
Thanks(0)
|
I also suffered badly with a fogged canopy which suddenly, and rather unrealitically I might add, cleared at 300' on finals. The demist knob had been pulled for a lot of the flight and all of the decent.
Jim
|
|
Jason210
Check-In Staff Joined: 05 Nov 2011 Points: 13 |
Post Options
Thanks(0)
|
Don't know if it's a problem or me, but mine is fogged up too.
For more than half-an-hour, it has been set to: - canopy: ON - engine air to cabin Nos. 1 & 2: ON - cabin air: WARM - demist knob: OUT (ON). I can see a little bit but it's still badly "misted". |
|
Martyn
Just Flight Staff Development Manager Joined: 31 Mar 2008 Location: Huntingdon, UK Points: 7615 |
Post Options
Thanks(0)
|
Hi Jason,
Please contact our support team and we'll look into this. Thanks Martyn |
|
Martyn
Just Flight Ltd |
|
BugDani
Check-In Staff Joined: 28 Feb 2017 Location: EBLG Points: 13 |
Post Options
Thanks(0)
|
Hi,
sorry but I have the same problem: Unable to demist the canopy ( even after opening !) BugDani. |
|
BugDani
Check-In Staff Joined: 28 Feb 2017 Location: EBLG Points: 13 |
Post Options
Thanks(0)
|
At this time, I've just re-named the fogged canopy textures (Inside and out side) and it's OK! |
|
Viking01
Check-In Staff Joined: 28 Apr 2017 Location: Bonn Points: 6 |
Post Options
Thanks(0)
|
Same problem here. Renaming the textures seems to be the only solution...
|
|
Regards
Gunter |
|
timmee62
Check-In Staff Joined: 16 May 2018 Points: 1 |
Post Options
Thanks(0)
|
I have noticed that changing the small knob on the right of the GPS changes the fogging on the canopy...
|
|
Post Reply | |
Tweet
|
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |