no elevator control |
Post Reply |
Author | |
7252phil
Check-In Staff Joined: 19 Jan 2014 Points: 6 |
Post Options
Thanks(0)
Posted: 19 Jan 2014 at 6:56pm |
Hi.Strange thing .Everything was working fine.I now have no rudder control at any speed.Tried reloading the aircraft different ways but no elevator control.The yoke moves though.
|
|
7252phil
Check-In Staff Joined: 19 Jan 2014 Points: 6 |
Post Options
Thanks(0)
|
Sorry ment elevator not rudder
Tried a reinstall but have the same problem The problem is with the 300 the 200 is ok |
|
Rich
Just Flight Staff Joined: 31 Mar 2008 Location: Planet Earth Points: 8543 |
Post Options
Thanks(0)
|
Hi,
Drop the support team a message via support@justflight.com and they should be able to help. |
|
7252phil
Check-In Staff Joined: 19 Jan 2014 Points: 6 |
Post Options
Thanks(0)
|
Contacted support and they told me to check the faqs if a solution for my issue was on the faqs i would not be asking for support
|
|
Rich
Just Flight Staff Joined: 31 Mar 2008 Location: Planet Earth Points: 8543 |
Post Options
Thanks(0)
|
Do these FAQ's not cover it?
Why can I not move the ailerons, flaps or gear? The 146-200/300 will load in a cold & dark state (all
systems/instrumentation turned off). Before you can control the
ailerons, flaps or gear, you will need to configure the aircraft for
takeoff either by using the AUTO icon or by following the checklists
found in the manual. Why is the elevator position fixed while on the ground? The elevator will have a fixed deflection when below 50 knots. As you accelerate to |
|
7252phil
Check-In Staff Joined: 19 Jan 2014 Points: 6 |
Post Options
Thanks(0)
|
Regards "The elevator will have a fixed deflection when below 50 knots. As you accelerate to
speeds above 50 knots, the elevator will return to the normal position." (I said I had no elevator at any speed!) Regards "Why can I not move the ailerons, flaps or gear?" I have gone through the ckecklist.I have flaps and gear working.I don not have the arrow icon to bring up the auto icon anywhere on my 300s 2d or 3d panel.I believe I do have it on my 200 though. |
|
7252phil
Check-In Staff Joined: 19 Jan 2014 Points: 6 |
Post Options
Thanks(0)
|
I cant get the panel selector on my 200 either.I read somewhere you can click on the yoke to get it but this is not working either.p.s im using prepar3dv1 and did select the option to install to prepar3d when installing.
|
|
chrishunt
Check-In Staff Joined: 05 Mar 2014 Location: UK Points: 1 |
Post Options
Thanks(0)
|
On the yoke there are two click spots - left hand side for autopilot and right hand side for auto start; these are on the tops of the control yoke on each side.
I can't find the panel selector either; I've put in a problem ticket and will pass on any information received. At least I can now get the aircraft in a state to fly! |
|
Post Reply | |
Tweet
|
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |