P3D 2.0 |
Post Reply | Page 12> |
Author | |
rafgath
Check-In Staff Joined: 26 Nov 2013 Points: 4 |
Post Options
Thanks(0)
Posted: 26 Nov 2013 at 8:33pm |
Hi
As I switched from FSX to P3D v2 so I'm wondering if you are going to prepare a version for P3D v2?
|
|
Georgeb
Just Flight Staff Joined: 26 Oct 2012 Location: Huntingdon Points: 125 |
Answer Post Options Thanks(0) |
As this product is not officially compatible with P3D v2.0 or V2.1 etc, we cannot support it but please feel free to use the work-around below at your own discretion.
We currently do not have a full on fix for this but if you know what you are doing with computers, you could try this. Our installer cannot see the P3D v2 .cfg file most likely because they have moved it but please try the below and see how you get on.
Please navigate to the following location C:\Users\[YOUR
USERNAME]\AppData\Roaming\Lockheed Martin\Prepar3D v2 and open up the file Now, look for the section that reads 'SimObjectPaths.0=SimObjects\Airplanes' Now load up P3D, do you see any traffic? |
|
Rich
Just Flight Staff Joined: 31 Mar 2008 Location: Planet Earth Points: 8543 |
Post Options
Thanks(0)
|
Too early to say yet.
|
|
quick
Ground Crew Joined: 12 Sep 2012 Points: 80 |
Post Options
Thanks(0)
|
The website states 360 works with P3D. It does not specify a certain version.
So Rich, traffic360 as it is now will not work with P3D 2.0? Please advise here other than me sending a support request because I am not seeking support. |
|
pipeorgan
Ground Crew Joined: 24 Jul 2008 Points: 66 |
Post Options
Thanks(0)
|
+1
|
|
Rich
Just Flight Staff Joined: 31 Mar 2008 Location: Planet Earth Points: 8543 |
Post Options
Thanks(0)
|
Hi,
We do not know is the honest answer. We haven't had time to test it in the new version. That is something that we will be getting around to ASAP. In the meantime, if you already have Traffic 360 then feel free to give it a try by changing the installer path to find V2. We would be interested to hear how you get on. Thanks Rich |
|
quick
Ground Crew Joined: 12 Sep 2012 Points: 80 |
Post Options
Thanks(0)
|
Thanks Rich but I don't think I'd be able to install it since I initially purchased Traffic X and then purchased the Traffic 360 Update. |
|
robains
Check-In Staff Joined: 19 Dec 2010 Points: 48 |
Post Options
Thanks(0)
|
I'm interested in this also, if you can provide a list of files that get installed and any FSX base files that are modified/update -- I'd be happy to test this for P3Dv2.
Rob
|
|
DocBird
Check-In Staff Joined: 30 Nov 2013 Points: 3 |
Post Options
Thanks(0)
|
I tried to install it just out of the box but to no avial.
No aircraft and no vehicles on any airports.Yes: AI-traffic is at 100% in P3D2. Do I have to switch off any Default bgl-files? |
|
Cornflex
Check-In Staff Joined: 02 Aug 2012 Location: EDDL, Germany Points: 25 |
Post Options
Thanks(0)
|
Traffic 360 works well with P3DV2 if using the estonia migration tool.
|
|
Blackrat
Check-In Staff Joined: 09 Mar 2013 Points: 10 |
Post Options
Thanks(0)
|
No it doesn't. I've tried several times with and without EMT left switched on. No aircraft, no anything. |
|
robains
Check-In Staff Joined: 19 Dec 2010 Points: 48 |
Post Options
Thanks(0)
|
Not working for either. :(
|
|
Shazzer
Check-In Staff Joined: 11 Mar 2013 Points: 13 |
Post Options
Thanks(0)
|
Don't have 360, but TrafficX worked on mine without issue.
|
|
Rich
Just Flight Staff Joined: 31 Mar 2008 Location: Planet Earth Points: 8543 |
Post Options
Thanks(0)
|
Hi,
I haven't used P3D yet so I can only speculate at this time, but I wouldn't have thought any migration tool would be smart enough to account for the fact that the T360 aircraft are installed into a custom location and that location is added to the FSX.cfg. Check whether the P3D version of FSX.cfg has a Traffic360 entry in the SimPaths section. If it doesn't then either add it manually, or move all the Traffic360 aircraft from their custom folder in SimObjects to the normal Airplanes folder. Like I say, I haven't used P3D or the migration tool so I'm just making my best guess at this point. |
|
Cornflex
Check-In Staff Joined: 02 Aug 2012 Location: EDDL, Germany Points: 25 |
Post Options
Thanks(0)
|
I use Traffic360 myself with P3DV2 and I do not see any problems so far.
You can simply install it via the migration tool and afterwards manually add the Traffic360 entry into the Prepar3D.cfg.
You will have to set the amount of traffic you'd like to see in P3DV2 options.
|
|
DocBird
Check-In Staff Joined: 30 Nov 2013 Points: 3 |
Post Options
Thanks(0)
|
I installedTraffic360 by using the default installer to the LM Folder.
The only other thing I had to do was to insert "SimObjectPaths.9=SimObjects\JFTraffic360" into the respective section of the Prepar3d.cfg. And now tons of AI everywere! |
|
Georgeb
Just Flight Staff Joined: 26 Oct 2012 Location: Huntingdon Points: 125 |
Answer Post Options Thanks(0) |
As this product is not officially compatible with P3D v2.0 or V2.1 etc, we cannot support it but please feel free to use the work-around below at your own discretion.
We currently do not have a full on fix for this but if you know what you are doing with computers, you could try this. Our installer cannot see the P3D v2 .cfg file most likely because they have moved it but please try the below and see how you get on.
Please navigate to the following location C:\Users\[YOUR
USERNAME]\AppData\Roaming\Lockheed Martin\Prepar3D v2 and open up the file Now, look for the section that reads 'SimObjectPaths.0=SimObjects\Airplanes' Now load up P3D, do you see any traffic? |
|
DocBird
Check-In Staff Joined: 30 Nov 2013 Points: 3 |
Post Options
Thanks(0)
|
George: That is what I did: Frist I used the installer for "P3D" and pointed it to the P3D2 Installation. Second I did what you just suggested and now I have the T360 AI traffic. I have, however, planes on EVERY parking Position although I have only 30% Airliner traffic set in P3D2. Any idea why is that? Anyway: I love the Traffic 360 planes in P3D2 with their shadows. |
|
Georgeb
Just Flight Staff Joined: 26 Oct 2012 Location: Huntingdon Points: 125 |
Post Options
Thanks(0)
|
Send us an email and we can look into it for you: http://www.justflight.com/support-contact
|
|
Loke
Check-In Staff Joined: 05 Jan 2014 Points: 3 |
Post Options
Thanks(0)
|
The default JFT360 traffic file works in P3D2.
If I try to compile myself, I get tons of WIF planes on ALL parkings at ENBO. I remedied this by pulling the GA (!) slider back to 10%. So if I compile myself, I can regulate WIF and NAX with the GA slider, which is way wrong. It is impossible to find a balance between clogged parkings / realistic traffic. So in my opinion the compiler does not work as intended in P3D. Have to go back to the JF default traffic bgl, and even with that one in use, the GA slider still regulates Commercial traffic.
|
|
CaptHowdy
Check-In Staff Joined: 18 Feb 2015 Location: United States Points: 1 |
Post Options
Thanks(0)
|
hello, I do fly prepar3d v2.5. you can select p3d as the installation type it will install to the folder in order to see actual traffic you must compile traffic. copy all of the aircraft from the just flight traffic folder and paste them into the aircraft folder. that's all.
|
|
Post Reply | Page 12> |
Tweet
|
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |