Thrust reversers |
Post Reply |
Author | |
Flattermann
Check-In Staff Joined: 09 Sep 2013 Location: Österreich Points: 9 |
Post Options
Thanks(0)
Posted: 14 Sep 2013 at 10:42am |
Hi,
in the manual there is a mention "Use the reversers as necessary to slow the aircraft..." But I havn't found the reversers. Normally it works with pressing F2 or F2+Back. Is there an aother way? |
|
Happy landings wishes Christian
|
|
asticou
Check-In Staff Joined: 17 Feb 2012 Location: MASS Points: 5 |
Post Options
Thanks(0)
|
Yes, you can reverse the pitch on the props. Upon the landing and during the roll out, put your cursor up on the red lights above the Manifold pressure gauges, and click. Click on them gain to bring props back to normal
Regards, Asticou |
|
DPJ
|
|
Flattermann
Check-In Staff Joined: 09 Sep 2013 Location: Österreich Points: 9 |
Post Options
Thanks(0)
|
Dear Asticou,
I know this clicking on the red lights, but only in the Connie model by Manfred Jahn. I meaned the model by JustFlight Constellation Professional and there are no such red lights! Nevertheless is the reverse-opportunity mentioned in the manual |
|
Happy landings wishes Christian
|
|
asticou
Check-In Staff Joined: 17 Feb 2012 Location: MASS Points: 5 |
Post Options
Thanks(0)
|
Christian,
Sorry about the wrong model. I don't have the JustFlight Constellation Professional. I will look into purchasing that. |
|
DPJ
|
|
asticou
Check-In Staff Joined: 17 Feb 2012 Location: MASS Points: 5 |
Post Options
Thanks(0)
|
Christian,
Not to date myself, but I have physically worked on Super Connie's, H&G models in Boston. The prop reversing was located on the throttle levers known as piggy back levers. I was reviewing the cockpit photos in the JustFlight Constellation Professional and didn't see those familiar piggy back levers. However, I am quite impressed to see the fine detail of the Pilot/Co-Pilot and FE panels. Do all the switches work on this? Can you do fuel management for the 8 to 10 tanks models? Finally, how does it fly. I am waiting for my new Jetline computer to arrive and will be putting a lot of add on's. Regards, Dale/ Asticou |
|
DPJ
|
|
Flattermann
Check-In Staff Joined: 09 Sep 2013 Location: Österreich Points: 9 |
Post Options
Thanks(0)
|
Dale/Asticou
FSX I use only for fun and the Connie was ever fascinating for me. My first Connie was the L-049A and I read the manual. It was very special and some things I dont understand. The fuel panel and the handling with the different tanks was to difficult for me! A half year ago I purchased the Constellation Professional from Just Flight (my first aircraft payware). There were negative voices in some forums, but I want it. It is not so bad but the thrust reverse I missed. I also miss the "status" view, which tells me immediatly warnings about the engine. But I am content. Sorry I can not tell about the management of all the knobs and fine instruments. I only can fly for fun. It is easy to start, after 3 minutes latest you have to reduce RPM and the manifold to avoid overheating. If you are watching the checkout for flight you can fly like an eagle. Landing is sometimes difficult and airspeed should not be under 120 kias. I am happy with the 11 textures and a paint kit is included. Regards
|
|
Happy landings wishes Christian
|
|
Post Reply | |
Tweet
|
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |