Avionics master |
Post Reply | Page 12> |
Author | |
gmac
Check-In Staff Joined: 15 Aug 2012 Points: 10 |
Post Options
Thanks(0)
Posted: 15 Aug 2012 at 4:42pm |
Good morning,
I am really enjoying this aircraft, but one thing has me stumped. In the manual on page 33, the avionics master shows 4 buttons (Autopilot 1, Master 1 Avionics 1 and Master 2). On my panels I only have 3 (A/P Master, Avionics A and Master B). My comm radios have the red bar across the freqs and I imagine this is due to the button layout. Any ideas on what I did wrong? Cheers, Gmac |
|
flyforever
P/UT Joined: 02 Aug 2012 Location: us Points: 121 |
Post Options
Thanks(0)
|
In addition to the AP master switch that you refer to, there's an autopilot button on the center pedestal. The third comes on when you turn on the second.
tc |
|
FV
|
|
gmac
Check-In Staff Joined: 15 Aug 2012 Points: 10 |
Post Options
Thanks(0)
|
Thanks tc' but my comms are inoperable....I don't see a master 2 switch button to turn on the radios.
|
|
gmac
Check-In Staff Joined: 15 Aug 2012 Points: 10 |
Post Options
Thanks(0)
|
Looks like only the 3 buttons on the 2D pop window......the VC does have the 4 avionics buttons.
Gmac |
|
parksie10
Check-In Staff Joined: 20 Mar 2012 Location: Cape Town Points: 14 |
Post Options
Thanks(0)
|
This ties in with something I've discovered. I turn all masters on and power up APU, as per tutorial, but my radios and all remain inoperable. HSI does not stabilise and all only comes right once engines are started.
|
|
If you're not living on the edge you're taking up too much space.
|
|
mrpilot
Check-In Staff Joined: 19 Aug 2012 Points: 9 |
Post Options
Thanks(0)
|
I experience exactly the same issue, I followed the tutorial several times by the letter and:
a.) HSI remains inop b.) coms remain inop I am also not able to start the engines, I've checked the tutorial several times but either there is a bug or I am doing something wrong. Thanks for your assistance. |
|
signal_runner
Check-In Staff Joined: 19 Aug 2012 Points: 3 |
Post Options
Thanks(0)
|
Yup - same issue.
Doesn't matter whether you use the 2d or 3d panel when following the tutorial, the avionics simply don't work until the engines are running...what a shame. |
|
mrpilot
Check-In Staff Joined: 19 Aug 2012 Points: 9 |
Post Options
Thanks(0)
|
How do you get the engines running? I don't even get that far. I followed the tutorial now 3 times but I must be missing something...
|
|
signal_runner
Check-In Staff Joined: 19 Aug 2012 Points: 3 |
Post Options
Thanks(0)
|
Couldn't start engines manually either - had to reload the aircraft and press the 'auto' button and that seemed to work.
|
|
mrpilot
Check-In Staff Joined: 19 Aug 2012 Points: 9 |
Post Options
Thanks(0)
|
what a bummer...how could this one slip through quality control, I hope this gets fixed soon!
|
|
signal_runner
Check-In Staff Joined: 19 Aug 2012 Points: 3 |
Post Options
Thanks(0)
|
the price of being an early adopter :) Yes I they need to fix asap. Absolutely fantastic aircraft to fly apart from that....
|
|
mrpilot
Check-In Staff Joined: 19 Aug 2012 Points: 9 |
Post Options
Thanks(0)
|
true true :-) yes, indeed a beauty and fantastic to fly. I just would like to start her up "by hand" :-) |
|
parksie10
Check-In Staff Joined: 20 Mar 2012 Location: Cape Town Points: 14 |
Post Options
Thanks(0)
|
I agree that it is a teething problem, and I'm sure it will be sorted. I start up by using good old "ctrl-E". It is still frustrating though.
|
|
If you're not living on the edge you're taking up too much space.
|
|
Martyn
Just Flight Staff Development Manager Joined: 31 Mar 2008 Location: Huntingdon, UK Points: 7615 |
Post Options
Thanks(0)
|
Unfortunately this isn't an issue that we encounter (no power to avionics before engine start). If you are having this issue, please submit a support request so we can try to identify why some get it and others don't.
|
|
Martyn
Just Flight Ltd |
|
gmac
Check-In Staff Joined: 15 Aug 2012 Points: 10 |
Post Options
Thanks(0)
|
Thanks Martyn......support request sent.
Cheers, Gmac |
|
parksie10
Check-In Staff Joined: 20 Mar 2012 Location: Cape Town Points: 14 |
Post Options
Thanks(0)
|
Thanks Martyn, have also sent in a support request. This was not indended as a dis, but to see whether my problem was unique and whether fellow pilots might have had a solution.
|
|
If you're not living on the edge you're taking up too much space.
|
|
alexcolka
Ground Crew Joined: 17 Dec 2010 Location: Ecuador Points: 63 |
Post Options
Thanks(0)
|
Hi,
Did any of you guys received any response from support about this issue yet? I sent mine days ago about this issue (the no radios power with everything on except engines). Please if someone knows how to fix that, please let us know. Thanks, Alex |
|
parksie10
Check-In Staff Joined: 20 Mar 2012 Location: Cape Town Points: 14 |
Post Options
Thanks(0)
|
I put mine through yesterday. I see that they try to answer questions in 2 business days. I'm assuming that there are teething problems and giving the crew the benefit of the doubt in sorting things out. I use other payware aircraft from other sites and sometimes they also take a little while. Lets hold thumbs that a great aircraft can only get better.
|
|
If you're not living on the edge you're taking up too much space.
|
|
Martyn
Just Flight Staff Development Manager Joined: 31 Mar 2008 Location: Huntingdon, UK Points: 7615 |
Post Options
Thanks(0)
|
Unfortunately response times over the last week or so have been extended due to staff absence/holidays. Everyone should have had a reply by tomorrow morning. If you haven't received a reply, feel free to submit another support request as we may not have received it.
|
|
Martyn
Just Flight Ltd |
|
mrpilot
Check-In Staff Joined: 19 Aug 2012 Points: 9 |
Post Options
Thanks(0)
|
Did any one you get a reply by now?
|
|
Post Reply | Page 12> |
Tweet
|
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |